USD-60N Defectoscope
(Equipment / Material)
Model Number: УСД-60Н
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
The USD-60N flaw detector is intended for the inspection of structures made of concrete, composites and other complex materials for defects, violations of uniformity and coordinates of these defects. Due to its technical features and versatility, an ultrasonic flaw detector can be effectively used in laboratories and enterprises, in the energy, construction, engineering industries, as well as related industries.
Overview:
Distinctive features:
- Convenient and easy to use, has high power and reliability
- Equipped with a convenient TFT-display and the function of changing the background of the screen, which allows you to use the device efficiently and comfortably even in direct sunlight
- Added functions of the B-scan and, optionally, the C-scan; the ability to measure the signal, etc.
- Simultaneous demonstration of signal amplitude and distance to it is possible
- There is a temporary sensitivity adjustment for 32 points with adjustable gain and position in each of them, as well as an option for additional connection of track or speed sensors
- The presence of Ethernet-connection and, as a result, the ability to build on the basis of a flaw detector automated complexes for examining composite materials that combine ultrasonic contact, impedance and non-contact types of control
Sweep Options | 2.67 - 6,000 μs in steps of 0.01 / 0.1 / 1/10/100 μs |
Delay options | 0 to 5,900 μs in steps of 0.01 / 0.1 / 1/10/100 μs |
Prism Delay | 0 - 100 μs in steps of 0.01 / 0.1 / 1/10 μs |
Input impedance | 50 ohm / 100 ohm |
The parameters of the probe pulse (radio pulse) | Amplitude 50 or 200 V, variable duration from 16 to 500 ns, step 16 ns |
Probe Pulse Damper | 0 to 15 half-cycles, delay up to 7 half-periods |
Probe Pulse Repetition Rate | 40 Hz |
Amplifier | 0.02 -2.5 MHz (- 6 dB) |
Gain control range | 100 db; pitch 0.5, 1.2 or 6 dB |
Characteristic of temporal sensitivity adjustment | Range - up to 60 dB; 12 dB / μs The curve is built on 32 reference points obtained from control reflectors or entered manually. |
Curve Amplitude - Distance | Adjustable in height, built on 32 points |
Detection | Full, radio signal (for all scans), negative or positive half-wave, B-, D-scans |
Clipping options | Compensated up to 90% of the screen height |
Characterization of control zones | Two independent, with varying width and start across the entire sweep range. Threshold levels - during detection - from 0 to 95% of the screen height; - with a radio signal - from - 95% to + 95% (1% step). Defect detection logic is independent |
Automatic defect alarm | Sound as well as light for each zone separately |
Methods for measuring time intervals | Between signals in a zone or from zero to the first signal in a zone, at the maximum of the signal or at the edge |
Amplitude Measurement Methods | from screen height - in percent; relative to the curve "Amplitude - distance", the threshold level in the zone and the reference signal in dB |
Color display options | TFT, 130x100mm, 640x480 pixels |
A-signal characteristics | 480x300 pixels in standard mode |
Memory | 500 settings with a signal; 5,000 control protocols (envelope, signal, examination results, instrument settings, time, date and protocol name) |
Interface type | RS232 / Ethernet |
Converter Connector Parameters | 2 CP50 or Lemo0 (optional) |
Battery type | Li-Ion 8 Ah |
Battery Life | 6-8 hours |
External Power Method | 220V AC Power Supply |
Operating Temperature Range | - 25 ° С to +55 ° С |
Height, width and length of the device, mm | 190x285x50 |
Weight with batteries | 3,5 kg |
Basic equipment:
- Electronic measuring unit with built-in battery
- AC adapter 220V
- A protective case equipped with a hood and a device for fixing the device on the operator's case
- Connecting cables
- Two ultrasonic transducers 04-M26, P111-0
- 60-Ethernet cables (1 m and 2 m) for connecting to a computer
- Ethernet switch
- Documentation Kit and Software CD
- Case for transporting the device
Extended equipment:
- Basic kit
- R / s impedance converter RSP-60
Litas LLC
Locations: Russia, Kazan
Main Products/Services: Non-destructive testing and flaw detection equipment
Registration: Russia, Kazan