Oily water Separator
The device can be equipped with a prefabricated tank and a set of automation, providing for the possibility of operation of the equipment in a fully automated mode without the presence of personnel.
Application area
The installation is used for pre-treatment of oily wastewater and to prevent accidents of the sewage system associated with the ingress of significant volumes of oil products. Oily water separators can be installed at the exit of the workshops, in front of the wastewater averaging tank or in the building of treatment facilities.
Initial requirements
Installation is allowed to be used with the following initial data:
- concentration no more than *, mg / l:
- suspended solids - 1500
- oil products - 1000
- BOD 20 - 100
- COD - 250
- other specific contaminants (including heavy metals, phenols, pesticides), for each substance - 1
* With appropriate retrofitting of the unit, emergency discharges of oil products of any concentration are possible.
Outline drawing
Specifications
# | Name of indicator | Value | ||
---|---|---|---|---|
1. | Nominal productivity, m 3 / h | 1 | 5 | 10 |
2. | Concentration in purified water, not more than, mg / l: | |||
- suspended solids | 200 | |||
- oil products | thirty | |||
3. | Overall dimensions, mm | |||
- length (L) | 1,300 | 2,200 | 2,200 | |
- width (B) | 1,250 | 2 630 | 5,260 | |
- height (H) | 1,500 | 3,130 | 3,130 | |
4. | Weight / mass in working condition, kg | 1,000 / 3,000 | 1,470 / 7,300 | 2 940/14 600 |
5. | Cleaning efficiency (depending on initial concentrations): | |||
- suspended substances | 60-80% | |||
- oil products | 60-90% | |||
6. | Mode of operation | continuous |
Note: all information presented in this prospectus is for guidance only and can be specified during the design or order of equipment. The company also reserves the right to make changes and modernize the equipment presented.