Gas Compressor units based on Reciprocating Compressor units

Compression of gas in the compressor can take place in several stages. A gas cooler and a condensate separator are installed after each compression stage. The number of compression stages depends on the required differential gas pressure at the inlet and outlet of the compressor station.
We manufacture reciprocating compressor units based on imported and Russian-made compressor blocks to produce gas with a pressure higher than 2.0 - 3.0 MPa.

Based on piston compressor blocks manufactured by KMZV (Russia, Krasnodar).

• Drive power from 55 to 315 kW.

• Maximum pressure up to 40 MPa.

Based on piston compressor blocks manufactured by Knox Western (USA), LMF (Austria).

• Drive power up to 620 kW.

• Maximum pressure up to 60 MPa.

Benefits of reciprocating compressors:

• The ability to compress gas up to a high pressure of 60 MPa.

• Possibility of implementing projects with high productivity and pressure on the basis of one compressor block.

• Possibility of using compressor blocks without cylinder lubrication and obtaining compressed gas without residual oil content.

Additional features

At the request of the Customer, the scope of delivery may additionally include:

• Separator on the suction / discharge line;

• Gas air cooler;

• Capacity control system (frequency regulator, slide valve, bypass);

• Pre-failure diagnostics system;

• Block-box with various additional systems (heating, ventilation, OPS, gas leakage control, etc.);

• APCS system with advanced functions.