Fluke 717 1000G Pressure Calibrator
Fluke 717 1000G Pressure Calibrator Features:
- Pressure measurement, 0.05% of full scale with an internal sensor up to 5000 PSI / 345 bar (5000G model)
- Measures mA with an accuracy of 0.015% and a resolution of 0.001 mA and provides 24 V power for the current loop
- Measures pressure up to 10,000 psi / 700 bar using one of 29 Fluke 700Pxx pressure modules
- Pressure fittings with 1/8 NPT female thread
- Compatible with non-aggressive gases and liquids
- Choice of eleven different appliances
- Zero, minimum, maximum and hold functions
- Calibrate P / I devices by measuring both pressure and current
- The test function of the pressure switch can record the values of its setting, discharge and deadband.
- Calculation of the percentage of errors in the measurement of current strength for a quick decision on compliance
- Long battery life
- Case with compartment for storing test leads
- Compatible with magnetic suspension system included in the accessory kit
- New switch check
Fluke 717 1000G Pressure Calibrator Specifications:
Pressure measurement (internal sensor)
Accuracy: 0.05% of full scale
Functions: zero, minimum, maximum, delay, averaging
Note: gases / liquids (non-aggressive)
Range: 0 - 1000 PSI, (0 mbar - 69 bar, 0 - 6894.76 kPa)
Resolution: 0.1 PSI, 1 mbar, 0.1 kPa
Overpressure: 2 X Full Scale
Maximum voltage: 30 V
Storage temperature: -40 ° С ... 60 ° С
Operating temperature: -10 ° C ... 55 ° C
Relative humidity: 95% (10 ° С ... 30 ° С); 75% (30 ° C ... 40 ° C)
45% (40 ° C ... 50 ° C); 35% (50 ° C ... 55 ° C)
Operating altitude: 3,000 m above sea level max
Shock resistance: drop test from a height of 1 m
Vibration: arbitrary, 2g, 5-500 Hz
Safety Class: CSA C82.2 No. 1010.1: 1992
EMC: EN50082-1: 1992 and EN55022: 1994 Class B
Dimensions (HxWxD): 201 mm x 98 mm x 52 mm
Weight: 600g
Contents of delivery:
- Fluke 717 1000G Pressure Sensor Calibrator
- Yellow case
- TL75 Test Lead Set
- Set of clips crocodile AC72
- AA alkaline battery
- User's manual