Polymer coated steel
(Equipment / Material)
Model Number: ППП
Condition: New
Made in: Russia
Location or Storage Country: Russia
Location: Russia / Chelyabinsk Region / Magnitogorsk
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Overview:
- Mills
- 1203
- general characteristics
- Available in rolls
- Thickness: from 0.2 to 1.2 - for a cold-rolled base from 0.4 to 1.2 - for a hot-dip galvanized base
- Width: 700-1650
- Roll Diameter: Inner: 508; 610 + 20 outdoor: 950-2200
- Packaging
- Roll weight: 5-15 t.
Note: specific dimensions and specifications are agreed upon at checkout.
| Type and material of coating | Symbol | Typical coating thickness range, µM | Typical coating thickness, µM |
| Paintwork (coating thickness - from 5 to 60 microns, depending on the coating material | |||
| Acrylic | Ay | 5-25 | 25 |
| Epoxide | EP | 3-20 | Not installed |
| Polyester | SP | 5-60 | 25 |
| Polyamide Modified Polyester | SP-PA | 15-50 | 25 |
| Silicone Modified Polyester | SP-SI | 15-40 | 25 |
| Acrylic silicone | Ay-si | 25 | 25 |
| Polyurethane | Pur | 10-60 | 25 |
| Polyamide Modified Polyurethane | Pur-pa | 10-50 | 25 |
| Polyvinylidene fluoride | PVDF | 20-60 | 25 |
| Plastisole (coating thickness - from 40 to 200 microns) | |||
| Polyvinyl chloride plastisol | PVS (P) | 40-200 | one hundred; 200 |
Assortment by the nature of the edge:
- unedged
- edged
By type of steel base:
- cold rolled sheet
The steel base complies with all established standards for:
- cold rolled steel by:
- EN 10130 (steel grades DC01, DC03, DC04)
- TU 14-101-496 (the ability to extract VOSV, OSV, SV)
- GOST 9045 (the ability to extract CB, VG)
- GOST 16523 (strength groups K260V, K270V, K310V, K330V, K350V, K390V, K490V, OK360V, OK370V; the ability to extract G, N)
- GOST 13345 (ChZhK brand), etc.
- cold-rolled hot-rolled sheets
The steel base complies with all established standards for:
- for cold-rolled hot-dip galvanized steel according to:
- EN 10142 (steel grades DX51D + Z, DX52D + Z, DX53D + Z? DX54D + Z, DX56D + Z)
- EN 10147 (steel grades S220GD + Z, S250GD + Z, S280GD + Z)
- TU 14-101-497 (the ability to extract VOSV, OSV, SV, VG)
- GOST 14918 (category of extracts VG, G, N, group HP), etc.
By type of coatings:
- paintwork
- plastisol
The color of the coating is selected based on the catalogs of color samples such as RAL Classic or RAL Design. By type of coating:
- one-sided
- bilateral
- single layer
- multilayer
Magnitogorsk Iron and Steel Works
Locations: Russia / Chelyabinsk Region / Magnitogorsk
Main Products/Services: Production of steel, a wide range of metal products
Registration: Russia / Chelyabinsk Region / Magnitogorsk