Contact flash butt Welding Machine MSO-201 UHL4

(Equipment / Material)

Model Number: МСО-201 УХЛ4

Condition: New

Location or Storage Country: Russia

Location: Russia / Sverdlovsk Oblast / Novoutkinsk

Service Engineering Support: Yes

Warranty: No

Price: Call for price

Description:

Resistance welding machines MSO - 201 can be ordered at the Iskra Electric Welding Equipment Plant at the manufacturer's price. We offer customers in Yekaterinburg a wide range of equipment that meets all the necessary requirements. The order can be made at any time convenient for you, on our website.

Overview:

It is intended for butt welding by continuous flash and pre-heat flash:

parts from low carbon steel with a section of 120 - 1000 mm2;
tool blanks and blanks for building structures made of low alloy steel, including reinforcement of reinforced concrete of classes II and III, with a diameter of up to 32 mm inclusive.

A special automatically performed upsetting process ensures the stability of the quality of welded joints.

The machine is designed to operate in the following conditions: ambient temperature from plus 1 ° C to plus 35 ° C, ambient humidity up to 80% at 25 ° C, atmospheric pressure from 84.0 kPa (630 mm Hg) to 106.7 kPa (800 mmHg)

Category 4 provides for the operation of the machine in closed, heated (cooled) and ventilated rooms.

The machine consists of:

Clamp fixed and clamp movable
Enclosures
Upset drive
Reflow drive
Cooling systems
Electric and pneumatic devices

Inside the case are integrated:

Epoxy compound welding transformer
Electromagnetic contactor
Panel with electrical circuit elements (some of them are mounted on the front panel of the housing)
Draft cylinder
Cooling system

Specifications

*Parameter Name*	*Norm*
*Recommended cross-sectional range of welded parts, mm* ² *low carbon steel* *low alloy steel*	*120-1400* *120-800*
*Nominal diameter of welded parts from low carbon steel, mm*	35
*Rated voltage of a three-phase power supply network at a frequency of 50 Hz, V*	*380*
*Number of phases for connecting a machine*	2
*The greatest power consumption at short circuit, kVA*	*310*
*The greatest admissible continuous power, kVA, no more*	43
*Power at PV = 50%, kVA*	61
*The greatest secondary current, kA, not less*	45
*Rated continuous secondary current, kA, not less*	8
*Resistance of a secondary circuit to a direct current, mkOhm*	58
*Secondary open circuit voltage, V:* *the greatest, not less* *smallest no more*	*6.7* *3.4*
Power factor during short circuit at rated stage, not less	*0.5*
*The number of steps for regulating the secondary voltage of the welding transformer*	8
*Rated stage*	7
*Nominal clamping force, N, not less*	*40,000*
*Sediment force, N:* *nominal (with a compressed air pressure of 0.49 MPa)* *the greatest (at a pressure of compressed air of 0.62 MPa)* *least*	*20000* *25,000* *5000*
*Moving plate stroke, mm, not less*	25
*Highest draft rate, mm / s, not less*	40
*Reflow rate, mm / s*	*0.5-5.0*
*Cooling water consumption, l / h*	*300*
*The largest calculation calculation of air at a pressure of 0.49 MPa in draft and clamping cylinders, m³ / h, no more*	*0.5*
*Long-term productivity when welding rods with a section of 320 mm², welds / h, not less*	*140*
*Long-term productivity when welding rods of nominal diameter, welds / h, not less*	*120*
*The greatest short-term productivity when welding rods of nominal diameter, welds / h, not less*	*160*
*Overall dimensions, mm:* *length* *width* *height*	*1025* *970* *1370*
*Weight, kg, no more*	*720*

Company Profile

Iskra Novotkinsk Plant

Locations: Russia / Sverdlovsk Oblast / Novoutkinsk

Main Products/Services: Welding, electrical equipment

Registration: Russia / Sverdlovsk Oblast / Novoutkinsk

Year Established: 1927