AUTOMATIC GUM TESTER IN ASTM D381

Features

1.The instrument uses the touch screen operating system in Chinese/English prompt interface with the friendly interface operation

2.The instrument uses the FDH liquid crystal temperature control system. Intelligent over-temperature protection system to ensure the safety of the laboratory

3.The instrument uses the Friend’s developed timing system to arrange the automatic start and end testing.

4.The instrument uses the FLD special automatic weighing system, which perfectly fusion with the host system to reach the weighing precision at 1/10000.

5.Automatic testing system, heating, weighing and testing result.

6.The instrument uses the automatic circulating sampling system to achieve the unlimited sample injection during the test.

Technical parameters

1. Applicable standards: GB/T8019,ISO6246,ASTM D381. temperature range: room temperature-300℃ , resolution: 0.1℃

2.Display: 7 inches of touch screen display, with the operation system in Chinese/English.

3.Temperature controlling system: FDH liquid crystal temperature controlling system, over-temperature protection.

4.Timing protection system: self-developed by Friend, automatic start and end test.

5.Detection: one-key operation, automatic heating, weighing, blowing, and detecting the results

6.Automatic sampling system: using the cyclic sampling system to achieve the unlimited sample injection during the test.

7.Weighing system: FLD special automatic weighing system, fusion with the host system to achieve the automatic weighing during the process to ensure the data precision without any manual

8. Working power: 220V  50HZ

9.Circuit hardware, software protection, power off memory

10.Reserved the PC interface(optional), which links to the LIMS system(optional)

11.Configure the 1/10000 balance by mettler
12.Constant temperature sample weighing and injection device for dryer