Shut-off and Control valve 25Ch945P Pn1.6Mpa (KPSR 100)

The valve of modification 25ch945p can be used at a liquid or gas temperature not higher than 150 degrees, while the working pressure should be within values of up to 1.6 MPa. The KPSR 100 series shut-off and control valve is a complex equipment that is mounted on a pipeline and is used for automatic regulation and shut-off of working media at various heat supply facilities.

The design of the KPSR valve is a single-seat globe valve and an electric actuator (EIM). The actuator develops a force that is transmitted to the plunger. As a result of this, the plunger moves along the vertical axis, thereby changing the flow area of the valve and regulating the flow of the pipeline working medium.

Time-tested cast iron is used as a material for the manufacture of KPSR valves (25ch945p). A special grade of cast iron makes the product strong and durable, the service life of the KZR declared by the manufacturer is 20 years. The KPSR valve is produced in the city of Minsk, the Republic of Belarus.

The quality of pipeline fittings from this manufacturer has been confirmed by years of successful operation of valves at a wide variety of facilities and conditions.

The model is equipped with Regada drives, which are manufactured in Slovenia. The shut-off and control valve (KZR) 25ch945p with EIM of the Regada type is designed to continuously control the flow rate of the working medium. This type of device differs from the valves of competing manufacturers in a number of advantages. Why is it worth buying a KPSR shut-off valve? It should be noted the high energy efficiency of the KZR series 100 - thanks to the use of modern technology of the shutter and the unloading chamber, the device can be operated even with low-power drives. This significantly saves energy and reduces wear on parts.

Since the structure has a removable seat, plunger and valve with different flow capacity, if necessary, you can replace parts without dismantling the entire valve.

The structure of the KZR allows one element of pipeline fittings to perform two functions at once - and to shut off the flow of the working medium and partially regulate it. The tightness characteristics are regulated by GOST 9544 and correspond to class A.