Pumps ЭЦН 5-30 with single-Support stages of the "Combi" series
(Equipment / Material)
Model Number: ЭЦН 5-30
Condition: New
Made in: Russia
Location or Storage Country: Russia
Location: Russia / Izhevsk
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
Low-adhesion ESPs provide higher operational and economic efficiency compared to pumps with metal working bodies when used in medium and, especially, in marginal stocks (up to 50 m3 / day), with the following complicating factors: high water cut (> 80%); scale deposits, asphalt-resin-paraffin deposits (ARPD), emulsions; increased viscosity of the formation fluid (over 10 cSt); high content of non-abrasive mechanical impurities (clay, etc.); high content of free gas at the pump intake, up to 55% (without additional devices).
Overview:
Technical characteristics of pumps type
XXX 1 (0) ESP (H2G) 5-30
XXX 1 (0) ESP (H2GA) 5-30
XXX 1 (0) ESP (Н2ГК) 5-30
ХХХ 1 (0) ESP (Н2ГКА) 5-30
on water with a density of 1000 kg / m 3 at a shaft speed of 2910 rpm
| Head, m | Number of sections, pcs. (section length, m) | Number of steps, pcs. | power, kWt | Weight, kg |
| -590 | 13) | 112 | 4.7 | 118 |
| -800 | fourteen) | 152 | 6.4 | 143 |
| -1000 | 15) | 191 | 8.0 | 167 |
| -1150 | 2 (3 + 3) | 224 | 9.4 | 207 |
| -1400 | 2 (3 + 4) | 264 | 11.1 | 232 |
| -1600 | 2 (4 + 4) | 304 | 12.8 | 257 |
| -1800 | 2 (4 + 5) | 343 | 14.4 | 282 |
| -2000 | 2 (5 + 5) | 382 | 16.0 | 307 |
| -2200 | 3 (3 + 4 + 4) | 416 | 17.5 | 347 |
| -2400 | 3 (4 + 4 + 4) | 456 | 19.2 | 372 |
| -2600 | 3 (4 + 4 + 5) | 495 | 20.8 | 397 |
| -2800 | 3 (4 + 5 + 5) | 534 | 22.4 | 421 |
| -3000 | 3 (5 + 5 + 5) | 573 | 24.1 | 446 |
Technical characteristics of pumps of gas-tight design type
XXX 1 (0) ESP (H2G3) 5-30
XXX 1 (0) ESP (Н2Г3А) 5-30
XXX 1 (0) ESP (H2G3K) 5-30
XXX 1 (0) ESP (H2G3KA) 5-30
on water with a density of 1000 kg / m 3 at a shaft speed of 2910 rpm
| Head, m | Number of sections, pcs. (section length, m) | Number of steps, pcs. | power, kWt | Weight, kg |
| -550 | 13) | 117 | 5.0 | 119 |
| -750 | fourteen) | 157 | 6,7 | 144 |
| -1000 | 15) | 197 | 8.4 | 169 |
| -1150 | 2 (3 + 3) | 229 | 9,7 | 210 |
| -1600 | 2 (4 + 4) | 309 | 13.1 | 260 |
| -1800 | 2 (4 + 5) | 349 | 14.8 | 285 |
| -2000 | 2 (5 + 5) | 389 | 16.5 | 309 |
| -2400 | 3 (4 + 4 + 4) | 461 | 19.5 | 376 |
| -2600 | 3 (4 + 4 + 5) | 501 | 21.2 | 400 |
| -2800 | 3 (4 + 5 + 5) | 541 | 22.8 | 425 |
| -3000 | 3 (5 + 5 + 5) | 581 | 24.5 | 450 |
Note - due to the continuous improvement of the design and the requirements of contracts for the supply of equipment, changes in its technical characteristics and configuration are possible.
Izhnefteplast
Locations: Russia / Izhevsk
Main Products/Services: Pumps
Registration: Russia / Izhevsk