JET 400 mud pump

(Equipment / Material)

Model Number: JET400

Condition: New

Location or Storage Country: Russia

Service Engineering Support: Yes

Warranty: Yes

Price: Call for price

Description:

The company OOO «RPB» offers you the JET 400 DRILLING PUMP. The «JET 400» drilling pump is designed for pumping drilling fluid into a well during geological exploration drilling up to 200 meters deep, as well as pumping viscous liquids for various technological needs in accordance with the technical specifications. Water, emulsions or clay solutions with a density of up to 1.2 g/cm3, a viscosity of up to 35 s according to SPV-5 with a solids content of up to 4.5% (by weight) can be used as drilling fluid. The pump can be used occasionally for pumping solutions with a viscosity of up to 60 s according to SPV-5, a density of up to 2 g/cm3 and a solids content of up to 10%. Maximum solution flow up to 400 l/min, maximum pressure up to 40 Bar. The pump has modest dimensions and low weight and is an ideal solution for drilling water wells with small-sized drilling rigs up to 200 meters deep. The JET 400 drilling pump consists of two main parts - drive and hydraulic, connected to each other. The pump in the basic configuration is equipped with a cylinder sleeve and a piston ø120 mm, other sizes of cylinder sleeves are supplied according to the Customer's requirements.

Overview:

Technical data

Inlet pressure kPa (kgf/cm2), (vacuum suction height at a pumped liquid temperature of up to 30°C)	50 (0.5)
Cylinder liner diameters, mm	80	90	100	110	120
Volumetric flow – Q rpm, l/min.	85	110	138	170	205
Maximum pump pressure at hydraulic system pressure of 200 Bar — P, Bar	40	35	30	25	20
Piston stroke length, mm	200
Suction pipe diameter, mm	48
Discharge pipe diameter, mm	42
Sound level, dB (not more than)	80
Flushing fluid characteristics	Clay solution: Density, g/cm³, not more than 1.2 Viscosity, s, according to SPV-5, no more than 35 Sand and sludge content, % (by weight) no more than 4.5
Flushing fluid characteristics	Cement mortar: Density, g/cm³, not more than 2 Viscosity, s, according to SVP-5, no more than 60 Content of solid particles, %, (by weight) no more than 10
Max. hydraulic oil supply Qmax.l/min	60
Nominal hydraulic system oil supply Qn, l/min (with a hydraulic system supply of 30 l/min, the drilling fluid supply will be equal to 205 l)	30

#буровой насос #Насос #Jet 400

Company Profile

Russian Industrial Drilling LLC

Markets: РФ, СНГ

Locations: Dubrovsky st. Sovetskaya plot 21/1 (31 km. MKAD — outer side)

Main Products/Services: Drilling equipment

Registration: Dubrovsky st. Sovetskaya plot 21/1 (31 km. MKAD — outer side)