Multifunctional pump Sigva MP-E-1-10

The multifunctional pump Sigva MP-E-1-10 is assembled on the basis of a pumping station, including one peristaltic pump NP-10 high pressure of Russian manufacture. The rotation of the drive and the required productivity of the unit are set with the help of the electronic unit. The pump Sigva MP-E-1-10 is a multifunctional device, it can be used in various fields. The operator has the ability to set the intensity of product supply. The pump Sigva MP-E-1-10 can work together with a compressor unit. For low-viscosity compounds, the supply is carried out using a hose, for high-viscosity ones - through a receiving hopper-funnel. Application possibilities: The pump Sigva MP-E-1-10 can be used for injection (pumping) of various compounds, as a putty station, for airless spraying, for spraying liquid waterproofing materials together with a compressor. The main type of work for the Sigva MP-E-1-10 peristaltic pump is considered to be injection and spraying of cement-polymer solutions. Each type of work uses its own type of spray gun. To increase the speed of work, two spray guns can be connected to the pump at the same time, or the outputs can be combined into one to increase productivity. Low-viscosity materials can be supplied through the inlet hose, and high-viscosity materials - through the receiving funnel. Application areas of the multifunctional pump: Injection of microcements Shotcreting of microcements Application of one-component waterproofing compounds, expanding waterproofing pastes and mixtures Application of protective and decorative compounds, resins, thermal insulation, liquid plug Use as a putty station Application of bitumen-based road emulsions