Chemical Peristaltic pump SIGVA PP-EAR-100-EPDM

The body of the chemical peristaltic pump SIGVA PP-EAR-100-EPDM is made of cast aluminum, has a robust design. The use of lubricating fluid provides increased protection of the working hose and significantly extends its service life. These pumps have a high level of reliability and are designed to operate in constantly difficult conditions. At the same time, replacing the working hose - the only wearing element - does not require much time and high qualifications. The main differences between the SIGVA PP-EAR pumps made of aluminum and the SIGVA PP-E series made of steel: rapid heat dissipation from the working hose; body resistance to abrasion; precise geometry and tightness of the body; use of lubricating fluid; for reliable protection of the hose and reduction of friction between the hose / roller; light weight and at the same time high rigidity of the body. It is possible to supply the pump with motors of other power and rotor speed. Rotor options: pumps with a working hose of 15, 20 mm. are supplied with shoes, the rest are supplied with rollers. Connection type: for pumps with a working hose of 15, 20 mm. - nipple, for the rest - DIN flange. The use of lubricant (lubricating and cooling liquid) for peristaltic hose pumps reduces friction between the pressure roller and the hose, and also acts as a coolant, evenly distributing and removing the generated heat. We will help you complete the SIGVA PP-EAR pump with everything you need: a pulsation damper, a hose damage sensor, a housing leakage damage sensor, a control unit with a frequency converter, a pressure gauge with a media separator, etc. Applications: Peristaltic pumps pump substances with utmost care, without destroying their structure, and therefore can work with substances with a complex structure - colloids, suspensions, adhesives, mastics, etc. The pump can pump liquids and pasty mixtures, alkalis and acids, and provides an operating pressure of up to 1.6 MPa. Dry running even for a long time does not affect the pump's performance and does not accelerate its wear. The peristaltic pump's performance is in direct linear dependence on the roller speed along the sleeve - that is, on the rotation frequency of the drive shaft with rollers. By adjusting this speed, it is possible to determine the amount of the pumped substance with a high degree of accuracy. Therefore, these pumps are used as a dosing pump. The pump has a high self-priming capacity and the ability to lift any liquid from a depth of up to 9.5 meters inclusive, can operate in the "dry running" and "reverse" modes. SIGVA PP pumps do not have end seals, which guarantees a complete absence of leaks of the pumped media and allows pumping any volatile liquids.