Add product
Product / Equipment

Peristaltic dosing pump SIGVA DP-16

(Equipment / Material)
Model Number: DP-16
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: Yes
Price: Call for price
Description:
The SIGVA DP-16 peristaltic dosing pump based on the NP-16 peristaltic pump is designed for volumetric dosing of viscous products prone to stratification and viscous products with inclusions, into containers of various sizes and shapes. It is equipped with the NP-16 dosing pump, which feeds the packaged product from the supply container. The dispenser is used in the chemical, food, pharmaceutical, perfumery and cosmetology industries. It is used for packaging liquid and viscous products. The principle of operation of the dispenser is as follows: the operator takes an empty container and places it on the table, presses the remote control pedal, the dosing pump is turned on and the dosing cycle begins, which is set by the timer. After the specified period of time has been worked out, the dosing pump is turned off. Then the operator removes the container and places the next one. It is possible to use the dispenser together with electronic scales that have an output relay that is triggered by a specified weight. The operating principle will be as follows: the operator takes an empty container and places it on the scale, presses the remote control pedal, the dosing pump is turned on and the dosing cycle begins. After reaching the specified "net (gross) weight" in the scale control circuit, a signal is generated for the control unit, the dosing pump is switched off. Then the operator removes the container from the scale and places the next one. Possible applications: Depending on the product being dosed, tubes resistant to acids, alkalis, and abrasives are installed in the dosing pump. If necessary, as the tube wears out, it can be easily and quickly replaced manually. The product pouring speed is set using the control unit. The dosing unit is equipped with a spout with a 10 mm flow section, allowing for dosing of a liquid product, and a spout with a 16 mm flow section, allowing for dosing of a viscous product with inclusions. It is used for packaging liquid and viscous products: Dispersion paints Putties Pesticides Pharmaceutical liquids Substances for the food and chemical industries in the required containers - containers, canisters, buckets of various capacities
Overview:
Water capacity, up to [liter/min] 4/8
Permissible size of inclusions, no more than [mm] 0.5
Dosing error, no more than [%] 2
Temperature of the product being dosed, no more than [оС] 90
Regulation of product feed rate Electronic
Supply voltage [V] 220/380
Power consumption, [kW] 1.5
Maximum rotation speed [rpm] 35/56
Weight, [kg] 105
Overall dimensions, Height x Length x Width [cm] 74x106x62

OOO Sigva

Markets: РФ, СНГ
Main Products/Services: Pumping equipment
Registration: 424031, Russia, Republic of Mari El, g. Yoshkar-Ola, st. Proletarskaya, 43
Year Established: 2008