Roll Bending Equipment

The enterprise JSC "Ulyanovsk NIAT" is one of the leading enterprises in the field of production of profile bending equipment for the manufacture of metal profiles. All equipment manufactured by us is manufactured using modern technologies for calculating forming rollers in new computer programs, which allows you to accurately select the most optimal profiling option. JSC "Ulyanovsk NIAT" provides a full range of services from developing technical specifications for the necessary profile bending equipment to commissioning and warranty service. The advantages of our equipment are its small size, cost-effectiveness and versatility, which allows you to produce a large range of different profiles on one machine. There are several types of profile bending equipment (depending on the thickness of the manufactured profiles): - light series (0.5-1.0 mm) - medium series (1.0-2.5 mm) - heavy series (3.0-5.0 mm) A separate innovation used in profile bending equipment is the use of universal and special inter-stand guides that allow high-quality molding of bending zones on complex profiles, where molding is impossible in conventional stands. This device is located between the main stands, which does not lead to an increase in the size of the machine, but at the same time allows to significantly expand the range of manufactured profiles, especially profiles with a complex cross-section. This technology and equipment turned out to be in demand in the market of manufacturers and consumers of bent profiles in modern rapidly changing conditions of development of various industries, including construction. Using one line of this type in production, the owner can produce a wide range of profiles, constantly increasing the range and volume of production.