Add product
Product / Equipment

Fuel tanker ATZ-6.5 Kamaz 4308-69(G5)

(Equipment / Material)
Model Number: 4308-69
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: Yes
Price: Call for price
Description:
The ATZ-6.5 fuel tanker on the KAMAZ-4308-69 (G5) chassis with a capacity of 6,500 liters is designed for transportation, short-term storage and refueling of light petroleum products (gasoline, diesel fuel) of various vehicles with metering of the dispensed fuel amount. The density of the petroleum product is no more than 0.83 t / cubic meter. The ATZ-6.5 fuel tanker on the KAMAZ-4308-69 (G5) chassis is equipped with the following equipment: fuel dispensing gun; meter; pump for filling and draining the tank. The tank design has 2 necks. The fuel tanker can be equipped with 1 to 3 compartments for different types of fuel. For example: a three-compartment tank - for diesel fuel, gasoline and motor oil. All compartments are equipped with their own devices for metering the release of liquids. The operating conditions of this special equipment are extensive: the equipment can move on all types of road surfaces and be used in the temperature range from -45 to +40 degrees. The ATZ tanker truck is equipped for the transportation of hazardous goods and meets the international requirements of ADR. We issue a "Calibration Certificate" for each tank. The KAMAZ 4308-69 (G5) chassis has a 4 * 2 wheel arrangement. The main purpose is to install specialized superstructures with a payload of up to five and a half tons. The vehicle has small dimensions, due to which it is highly mobile. It is used both within the city and outside it. The car is equipped with small-diameter wheels, a low frame, rear air suspension and uniform load distribution, which allows maneuvering and entering sharp turns. At the same time, the likelihood of skidding or overturning is minimized. KAMAZ 4308-69 (G5) is equipped with the following equipment: disc brakes, small-leaf springs and ABS. The length of the frame on which the attachment is installed may vary depending on the modification. The Kamaz 4308-69 (G5) chassis is equipped with a Cummins engine with a power of 245 hp. The engine meets the environmental safety requirements of Euro-5, which allows it to be used within the city without violating the established standards for emissions of harmful substances.
Overview:

Tank characteristics

Tank capacity, l 6500
Pump options SCL-00, SCL-20/24, SVN-80, NMSh 8-25 6.3/25
Cross section suitcase
Fuel dispensing unit counter/gun
UVT location on the side
Steel 09G2S, 5 mm
Number of necks 2
Number of sections from 1 to 3
Fire extinguishing system Yes
Discharge and suction hose DN=65 mm 2 pcs. 4 m each
Neck cover aluminum
Bottom and breathing valves Yes
Storage location for suction and discharge hoses on the sides of the tank
Service area stairs with landing

Characteristics SCL-00, SCL-20/24, SVN-80, NMSh 8-25 6.3/25

SCL-00 SCL-20 SCL-24 SVN-80 NMSH 8-25 6.3/25
Feed, m3/h 28.8 32 45 35 6.3
Head, m 3 5.4 4.5 2.6 2.5
Self-priming height, m 4.5 5.5 5.5 6.5 6
Power, kW 5.5 18.5 24 6.5 7.5
Rotation speed, rpm 1500 1450 1700 1450 1450
Efficiency of the pumping unit, % 35 33 33 38 50
Weight, kg 58.8 35 35 17.6 17.6

Characteristics of the Kamaz 4308-69 (G5) chassis

Mass parameters
Engine
Power supply system
Transmission
Main gear
Clutch
Brake system
Chassis
Cabin
Wheels and tires
Characteristics of the vehicle by gross weight
Electrical equipment
Overall dimensions
Wheel formula 4×2
Maximum trailer weight, kg 8000
Curb weight, kg 4800...4980
  • rear axle load, kg
1600...1750
  • front axle load, kg
3200...3230
Gross weight, kg 11990
  • rear axle load, kg
  • 7630
  • front axle load, kg
  • 4360
Model Cummins ISB6.7E5 250
Ecological class Euro-5
Type Turbocharged diesel with intercooling of charge air
Arrangement and number of cylinders Row, 6
Working volume, l 6.7
Maximum power, hp (kW) 242 (178)
  • at rotation speed, rpm
  • 2500
Maximum torque, Nm ( kgf m) 937 (96)
  • at rotation speed, rpm
  • 1300
Compression ratio 17.3
Fuel tank capacity, l 210
Model ZF 6S1000
Gear ratios on gears 1-6.75; 2-3.60; 3-2.12; 4-1.39; 5-1.00; 6-0.78; ZH-6.06
Type Mechanical 6-speed with synchronization system
Control Mechanical, remote
Gear ratio 4.22
Type Hypoid
Model ZF&SACHS MF 395
Type Single disc, diaphragm, push type
Drive Hydraulic with pneumatic booster
Main
  • Pneumatic disc mechanism with dual-circuit drive;
  • safety is ensured by the ABS 400 system
Spare All contours of the working system
Parking Spring brake mechanism
Auxiliary Engine brake
Front suspension
  • Equipped with small leaf springs;
  • rubber buffers act as travel limiters;
  • hydraulic shock absorbers ensure a smooth ride;
  • The rear ends of the springs are sliding.
Rear suspension Spring with stability control system or pneumatic with two cylinders
Driving a car Power steering
Type Above the engine, with a high roof
Execution Without or with a sleeping place (depending on the configuration)
Rim size 6.75-19.5
Tire size 245/70 R19,5
Speed category L or M
Bearing capacity (index) 135/133
Wheel type Disc, with profiled rim
Tyre type Tubeless
Busbar Gable roof
Maximum speed, not less than, km/h 100
Angle of climb, not less than, % (deg.) 25 (14°)
External dimensions. turning radius, m 9.6
Batteries, V/A h 2x12/190
Generator, V/W 28/2000
Voltage, V 24
Length, mm 5200
Width, mm 2550
Height, mm 3900
Front track, mm 2040
Rear track, mm 1900
Wheelbase, mm 4200

OOO "NTC "Taganaj-Avto"

Markets: РФ, СНГ
Main Products/Services: Tank trucks for various purposes, oil field special equipment
Registration: d. Office 32, 5/17, Turgoyakskoe highway, Miass