Mobile Thermal Destruction units TDU Factor-500 with GEE for more than 700 types of waste

The Factor-500 series is a new generation of mobile thermal destruction units manufactured by NPO Dekanter! Having a design and operating principle similar to the TDU-2000, widely known in Russia and abroad, the Factor-500 has undergone extensive modernization and can be recognized as the most advanced waste incineration unit in Russia by a number of parameters. Just like its predecessors, the TDU-500 is designed for thermal disposal of oil sludge with an extremely high content of mechanical impurities, oil-contaminated soils, drilling mud, oil-containing waste generated during emergency spills of oil and oil products, solid waste and other bulk and pasty waste. Mobile thermal destruction units TDU Factor-2000 - Loading with a bucket loader Loading with a bucket loader These units are extremely mobile, they fit completely into two standard sea containers (40 and 20 ft) and can be transported from one work site to another, followed by their launch within 24 hours. The units are successfully used in the oil refining and oil production industries, at solid municipal waste and hazardous waste landfills, at industrial enterprises, in the oil and gas complex, in sea and river ports. Mobile thermal destruction units TDU Factor-2000 - The standard exhaust gas afterburning chamber is mounted in the roof of the units manufactured in 2014. The standard exhaust gas afterburning chamber is mounted under the roof of the unit. The sludge intended for disposal is fed by a bucket loader or in any other way into the TDU-500 receiving tank, from where it is dosed into the combustion chamber by an auger built into the bottom of the funnel. The combustion chamber is a drum located on rollers and equipped with a rotating drive. The sludge is burned in the drum using a burner running on diesel or other fuel with a forced additional air supply system. Due to the fact that the drum has a slight slope, the sludge gradually moves from the receiving funnel to the ash discharge tray, constantly being exposed to high temperatures (800-1200 ° C) and active oxygen blowing. Mobile thermal destruction units TDU Factor-2000 - Ash unloading Ash unloading, as an option it is possible to install a screw or pneumatic transport for loading ash into containers or vehicles The performance of the unit, temperature, duration of sludge residence in the combustion chamber and, as a result, the intensity of its burning, are regulated by several parameters - the speed of sludge supply to the combustion chamber, the operating mode of the burner, the amount of air supplied and the speed of rotation of the drum. Exhaust gas purification is ensured by forced afterburning of exhaust gases in a combustion chamber with a separate burner, dust collectors and a modern low-resistance wet scrubber that removes heavy metals and other harmful impurities from the exhaust gases. Factor TDU units have been manufactured since 2011 and are used by leading oil and service companies in Russia and the CIS countries, including Lukoil OJSC, Rosneft Oil Company OJSC and Novatek OJSC. In October 2018, the Factor-500 TDU series passed the State Environmental Expertise of the Federal Service for Supervision of Natural Resource Usage for more than 700 types of hazard classes III, IV and V waste and disposal of more than 70 of them (mining and wastewater treatment waste; textile, chemical, food and printing industries; solid waste; construction, repair, logging, fishing waste; sleepers, etc. - a separate list is available upon request). The Factor-500 TDU units have a Certificate of Conformity and a Permit for Use from Rostekhnadzor.