Welding Inverter SAW Standart MZ 1000 (M308) AT-1
(Equipment / Material)
Model Number: SAW Standart MZ 1000 (M308) АТ—1
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: Yes
Price: Call for price
Description:
STANDART MZ 1000 (M308) is an inverter device for automatic submerged arc welding with solid wire and self-shielding powder wire. The inverter can be used for manual arc welding, surfacing and gouging.
Overview:
Welding modes
| Characteristic | Meaning |
|---|---|
| Welding mode SAW DC CV | Yes |
| Welding mode SAW DC CC | Yes |
| Welding mode MMA DC | Yes |
Technical characteristics of the source
| Characteristic | Meaning |
|---|---|
| Power supply voltage | 380 V |
| Mains voltage range | 320-430 V |
| Power supply frequency | 50 Hz |
| Number of phases | 3 phases |
| Current consumption | 79 A |
| SAW power consumption | 52 kVA |
| Power consumption MMA | 52 kVA |
| SAW welding current | 100-1000 A |
| Welding current MMA | 100-1000 A |
| SAW working voltage | 24-44 V |
| Working voltage MMA | 24-44 V |
| Open circuit voltage SAW | 79 B |
| MMA open circuit voltage | 79 B |
| Mon (40°C) | 100 % |
| Welding current at duty cycle, 100%, SAW | 1000 A |
| Welding current at duty cycle, 100%, MMA | 1000 A |
| MMA electrode diameter | 1.5–6 mm |
Technical characteristics of the welding tractor
| Characteristic | Meaning |
|---|---|
| SAW welding wire diameter | 2.0 mm/ 2.4 mm/ 3.0 mm/ 3.2 mm/ 4.0 mm/ 5.0 mm |
| Wire drum capacity | 30 kg |
| Flux container volume | 6 l |
| Wire feed speed | 30–300 cm/min |
| Welding speed | 10–150 cm/min; |
| Number of videos | 4 pcs |
| Welding head adjustment height | 100 mm |
| Height adjustment of vertical column | 70 mm |
| Crossbar adjustment height | 100 mm |
| Angle of rotation of the cross beam around the vertical column | 90 ° |
| Burner tilt angle | 45 ° |
| Maximum coil weight | 20 kg |
| Inner diameter of wire drum | 300 mm |
Additional SAW features
| Characteristic | Meaning |
|---|---|
| Start of welding with "Pull-through" | Yes |
| Start Welding by Touch | Yes |
| Wire pre-feed | Yes |
| Automatic welding mode without carriage movement | Yes |
| Function "Mass Contact Detection" | Yes |
| Adjustable Hot Start Current | Yes |
| Adjustable ARC Force | Yes |
| Soft Start Function | Yes |
Additional MMA Features
| Characteristic | Meaning |
|---|---|
| Adjustable Hot Start | Yes |
| Adjustable ARC Force | Yes |
| Air arc gouging | Yes |
Design solutions
| Characteristic | Meaning |
|---|---|
| Type of manufacture | Combined |
| Transistor type | IGBT modules |
| Control type | Processor digital |
Basic characteristics
| Characteristic | Meaning |
|---|---|
| Power factor | 0.9 |
| Efficiency | 85 % |
| Insulation class | F |
| Degree of protection | IP 21 |
| Operating temperature | –5…+40 °C |
| Overall dimensions of the source | 890×400×811 mm |
| Source weight | 115 kg |
| Overall dimensions of the tractor | 1030×470×730 mm |
| Tractor weight | 56 kg |
Panel connections
| Characteristic | Meaning |
|---|---|
| Power outputs | Busbar for bolt M10 |
| Control connector | 10 pin |
LLC "Insvarkom"
Locations: Leningrad region, Vyritsa urban settlement, Oredezhskaya street, 2Zh
Main Products/Services: Welding equipment