Add product
Product / Equipment

Weighted Drill Pipes

(Equipment / Material)
Weighted Drill Pipes
Model Number: УБТ
Condition: New
Location or Storage Country: Russia
Location: Russia, Perm
Service Engineering Support: No
Warranty: No
Price: Call for price
Description:
Weighted drill pipes (UBT) are designed to increase rigidity and increase the mass of the lower part of the drill string, through which the load on the bit is created.
Overview:

Type of execution UBT


A - smooth without grooves;
L - with a groove under the elevator;
B - with grooves under the elevator and wedge grip;
C - smooth with spiral grooves;
LS - with a groove under the elevator, with spiral grooves;
BS - with grooves under the elevator and wedge grip, with spiral grooves;
AT - smooth with carbide belts;
LT - with a groove under the elevator, with carbide belts;
BT - with grooves under the elevator and wedge grip, with carbide belts;
ST - smooth with spiral grooves, with carbide belts;
LST - with a groove under the elevator, with spiral grooves, with carbide belts;
BST - with grooves under the elevator and wedge grip, with spiral grooves, with carbide belts.

Due to their operational characteristics, drill collars with spiral grooves are most widely used. The presence of spiral grooves reduces the contact area of the wall of the well and the pipe, thereby reducing the possibility of "sticking" of the pipes, and also increases the torque due to the utilization of the energy of the upward flow of the drilling fluid.

Pipes with spiral grooves can simultaneously be run with grooves under the elevator and wedge grip. You can find thick-walled drill pipes on our website that are manufactured at PKNM.

UBT pipe sizes

Diameters mm GOST R50864 thread (special 7) The linear mass of the telescope, kg / m Permissible make-up torque (unloading threaded grooves), kNxm Permissible make-up torque (with discharge threaded grooves), kNxm
Outdoor D Holes d Grooves under the elevator D2 Grooves under the wedge grip D3

σT = 758 MPa

79

32 65 73 Z-65 (NC 23) 32 4,5 4.0

89

32
38 		73
73 		73
73 		Z-73 (NC 26)
Z-73 (NC 26) 		42
40 		6.5
6.0 		6.0
5.5

95

32
35
38 		73
73
73 		73
73
73 		Z-86 (NC 31)
Z-86 (NC 31)
Z-86 (NC 31) 		49
48
46 		6.0
6.0
6.0 		5.5
5.5
5.5

105

44
51 		89
89 		102
102 		Z-86 (NC 31)
Z-86 (NC 31) 		56
52 		10.0
8.5 		9.5
8.0

108

32
38
40
44
46
51
57 		89
89
89
89
89
89
89 		102
102
102
102
102
102
102 		Z-86 (NC 31)
Z-86 (NC 31)
Z-86 (NC 31)
Z-86 (NC 31)
Z-86 (NC 31)
Z-86 (NC 31)
Z-86 (NC 31) 		65
63
62
60
58
56
52 		12.0
11.5
11.0
10.5
10.0
9.5
8.0 		11.5
11.0
10.5
10.0
9.5
9.0
7.5

121

44
46
46
51
51
57
57 		102
102
102
102
102
102
102 		114
114
114
114
114
114
114 		Z-94 (NC 35)
Z-94 (NC 35)
Z-102 (NC 38)
Z-94 (NC 35)
Z-102 (NC 38)
Z-94 (NC 35)
Z-102 (NC 38) 		78
77
77
74
74
70
70 		15.0
15.0
14.5
13.5
14.0
12.5
14.5 		14.0
14.0
13.5
13.0
13.0
11.5
13.5

127

57 102 114 Z-102 (NC 38) 79 16.5 14.5

133

57 114 114 Z-102 (NC 38) 88 16.5 14.5

146

57
57
57
71
71
76
76 		130
130
130
130
130
130
130 		140
140
140
140
140
140
140 		Z-118 (NC 44)
Z-121 (4 1/2 FH)
Z-122 (NC 46)
Z-121 (4 1/2 FH)
Z-122 (NC 46)
Z-121 (4 1/2 FH)
Z-122 (NC 46) 		111
111
111
one hundred
one hundred
95
95 		27.0
25.5
24.5
24.5
24.5
23.0
24.5 		23.0
21.5
21.5
21.5
21.5
19.0
21.5

152

57
57
57
71
71
76 		130
130
130
130
130
130 		140
140
140
140
140
140 		Z-118 (NC 44)
Z-121 (4 1/2 FH)
Z-122 (NC 46)
Z-118 (NC 44)
Z-122 (NC 46)
Z-122 (NC 46) 		122
122
122
111
111
106 		28.5
30.5
30,0
23.0
27.5
25.0 		25.5
27.5
27.0
20,0
24.5
22.0

159

57
71 		146
146 		152
152 		Z-118 (NC 44)
Z-122 (NC 46) 		135
124 		28.5
27.5 		24.5
23.5

165

57
57
71
71
76
76 		146
146
146
146
146
146 		152
152
152
152
152
152 		Z-121 (4 1/2 FH)
Z-122 (NC 46)
Z-121 (4 1/2 FH)
Z-122 (NC 46)
Z-121 (4 1/2 FH)
Z-122 (NC 46) 		147
147
136
136
131
131 		30,0
34.0
25.5
28.0
23.5
26.0 		26.0
30,0
21.5
24.0
19.5
21.0

* Direction of spiral - right

171

57
57
71 		152
152
152 		159
159
159 		Z-122 (NC 46)
Z-133 (NC 50)
Z-133 (NC 50) 		159
159
148 		34.0
45.0
39.0 		29.0
40,0
34.0

178

57
71
71
80
90 		159
159
159
159
159 		168
168
168
168
168 		Z-133 (NC 50)
Z-133 (NC 50)
Z-147 (5 1/2 FH)
Z-147 (5 1/2 FH)
Z-147 (5 1/2 FH) 		174
163
163
155
144 		45.5
39.0
44.0
44.0
44.0 		41.5
35.0
40,0
40,0
40,0

Pipe Length: 8.3 m; 9.14-9.45 m.
In the manufacture of spiral grooves and grooves for an elevator and wedge grip, the weight of the pipe is reduced by 5–7%.

Company Profile

LLC Perm Oil Engineering Company

Total Employees: 224
Locations: Russia, Perm
Main Products/Services: Production of oilfield (NPO) and drilling equipment
Registration: Russia, Perm
Year Established: 1993