Adapter flange

An example of an adapter flange order: AF-280x21 / 350x35, N = 150 mm., With m / c, where:

AF - adapter flange; designation can be replaced by KP-01 - adapter flange design;

280 - nominal pass in mm. side 1

21 - working pressure in MPa. side 1

350 - nominal pass in mm. side 2

35 - working pressure in MPa side 2

N - construction height of the flange in mm., For example 150 mm.

m / c - mounting kit according to GOST 28919-91 (mounting kit is expected on two sides)

When ordering a special adapter flange with a groove for a packing element or shank, indicate the diameter of the packing element and the height of the groove. Example AF-280x21 / 280x35 (f230x100), F185, N = 180 mm., Where

AF - adapter flange

280x21 - flange connection in accordance with GOST 28919-91, side 1

280x35 - flange connection according to GOST 28919-91, side 2. On side 2, a diameter of 230H9 with a groove height of 100 mm is made.

F185 - conditional passage adapter flange.

N - construction height in mm., In this case 180 mm.

Depending on customer requirements, the adapter flange can be made in the form of an adapter coil, that is, one side for the 2nd design of the stud (body flange), the second side for the 1st design of the stud (flange-flange). Order example: AF-180x35 / KP-350x35, N = 280 mm, where

AF-180x35 - side 1 for mounting kit 2 (second body-flange design according to GOST 28919-91)

KP-350x35 - side 2 for mounting kit 1 (first version flange-flange according to GOST 28919-91)

H = 280 mm. - construction height in mm.