Vibration Measurement Channel IKV-1-3-1

It consists of a eddy current transducer DS-1 (DS-2, DS-3) and an AS131 transducer (in the measuring unit), or an AS1312 transducer on a connection cable.

It is possible to use on compressor equipment;

Type of output signal - 4 ... 20 mA;

SPECIFICATIONS

METROLOGICAL PARAMETERS

• Range of measurement of the range of vibration displacement, microns

  0 ... 125, 0 ... 250 (eddy current transducer DS-1 (M8x1))
  0 ... 100, 0 ... 250 (eddy current transducer DS-1 (M10x1))
  0 ... 500, 0 ... 1 000 (eddy current transducer DS-2)
  0 ... 2 000 (eddy current transducer DS-3)

• Range of working frequencies, Hz

  2 ... 500

• Installation clearance (default), mm

  1.0 ± 0.2 (eddy current transducer DS-1 (M8x1))
  1.5 ± 0.2 (eddy current transducer DS-1 (M10x1))
  3 ± 0.2 (eddy current transducer DS-2)
  5 ± 0.2 (eddy current transducer DS-3)

• Electrical insulation resistance between the vibration transformer circuit and the shell, MΩ, not less

  40

INTERFACE

• Type of output

  current loop 4 ... 20 mA

• Supply voltage range, V - 10 ... 24

EXPLOSION PROTECTION

• View - intrinsically safe circuit

• Marking

  0ExiaIICT6 (eddy current transducer DS-1, DS-2, DS-3)
  0ExiaIICT5 (rev. Block)

• Connection

  via TIK-PLC 112 controller
  through the security barrier

CONSTRUCTION PARAMETERS

• Execution

  IKV-1-3-1 isp. A (eddy current transducer
  DS-1 (DS-2, DS-3) version 00 or 01 (with connector), converter
  AS131, measuring unit, safety barrier
  TIK-BIS-52-7 (TIK-BIS-51-7, TIK-BIS-12-1))
  
  IKV-1-3-1 isp. B (eddy current transducer
  DS-1 (DS-2, DS-3) version 02 with connector and converter
  AS1312 on cable), measuring unit, barrier
  Safety TIK-BIS-52-7 (TIK-BIS-51-7, TIK-BIS-12-1))

• Overall dimensions, mm

  D (6.8) L (50; 70; 90) (eddy current transducer DS-1 (M8x1))
  D (8.5) L (50; 70; 90) (eddy current transducer DS-1 (M10x1))
  D (14.5) L (50; 70; 90) (eddy current transducer DS-2)
  D (22.5) L (90) (eddy current transducer DS-3)
  98.5x27.5x59 (AS131 converter)
  277x217x84 (resize block)

• Weight, kg, no more

  0.35 (eddy current transducer DS-1)
  0.4 (eddy current transducer DS-2)
  0.5 (eddy current transducer DS-3)
  0.1 (AS131 / AS1312 converter)
  2.5 (measure unit)

• Type of mount

  threaded hole M8x1 (eddy current transducer DS-1)
  threaded hole M10x1 (eddy current transducer DS-1)
  threaded hole M16x1 (eddy current transducer DS-2)
  threaded hole M24x1 (eddy current transducer DS-3)

• Degree of protection

  IP67 (eddy current transducer DS-1, DS-2, DS-3)
  IP20 (AS131 converter)
  IP66 (meas. Block)

OPERATING PARAMETERS

• Range of working temperatures, ºС

  -40 ... + 135 (eddy current transducer)
  -60 ... + 135 (eddy current transducer, climatic version CL)
  -40 ... + 70 (AS converter)
  -60 ... + 70 (AS converter, CL climate version)

MANUFACTURER RELIABILITY AND WARRANTY PARAMETERS

• Mean time between failures, hours, at least 10,000

• Warranty period, months 18

• Service life, years, not less than 10