CEMS Mcs200Hw Systems

The built-in lambda probe additionally measures oxygen. Additionally, the measurement of total organic carbon can be supplemented by the integrated GMS811 FIDORi. Internal zero point monitoring allows you to quickly check measured values without span gases. A web display and predefined task assistants in the software make operation very easy.

Short review

• Measure up to 10 IR components plus O ₂ and TOC
• Hot Extraction Measurement Technology
• Gas production with virtually no wear thanks to the ejector pump
• Zero point monitoring with internal adjustable filters
• Modbus ^® Certified Digital Interface
• Web server for platform independent device management
• Use of dry test gases for HCl and NH ₃

Areas of use

• Emission control of waste incinerators and power plants, as well as co-incineration plants, such as cement plants
• Measurement of nitrogen oxides (NO, NO ₂ , N ₂ O) in nitric acid plants
• Monitoring SO ₃ in coal-fired power plants

The exact device data and product specifications may vary and are independent of the respective application and customer specification.

• MCS200HW system

  Measured values	CH 4 , CO, CO 2 , Corg , HCl, H 2 O, H 2 SO 4 , NH 3 , NO, NO 2 , N 2 O, O 2 , SO 2 , SO 3
  Measured parameters	CH 4 , CO, CO 2 , Corg , HCl, H 2 O, NH 3 , NO, NO 2 , N 2 O, O 2 , SO 2
  Measurement principles	Interference filter correlation, gas filter correlation
  Measuring distance 8.48 m
  Trial amount 200 l / h ... 400 l / h
  Measuring ranges CH 4 0 ... 70 ppm / 0 ... 700 ppm CO 0 ... 60 ppm / 0 ... 8.000 ppm CO 2 0 ... 25 Vol .-% / 0 ... 50 Vol .-% C org 0 ... 15 mg / m³ / 0 ... 10.000 mg / m³ Hcl 0 ... 9 ppm / 0 ... 1.840 ppm H 2 O 0 ... 40 Vol .-% H 2 SO 4 0 ... 50 ppm / 0 ... 200 ppm NH 3 0 ... 15 ppm / 0 ... 650 ppm NO 0 ... 110 ppm / 0 ... 1.865 ppm NO 2 0 ... 25 ppm / 0 ... 240 ppm N 2 O 0 ... 50 ppm / 0 ... 1.015 ppm O 2 0 ... 25 Vol .-% SO 2 0 ... 26 ppm / 0 ... 875 ppm SO 3 0 ... 50 ppm / 0 ... 200 ppm
  Certified measuring ranges CH 4 0 ... 50 mg / m³ / 0 ... 500 mg / m³ CO 0 ... 75 mg / m³ / 0 ... 10.000 mg / m³ CO 2 0 ... 25 Vol .-% C org 0 ... 15 mg / m³ / 0 ... 50 mg / m³ / 0 ... 150 mg / m³ / 0 ... 500 mg / m³ Hcl 0 ... 15 mg / m³ / 0 ... 3.000 mg / m³ H 2 O 0 ... 40 Vol .-% NH 3 0 ... 10 mg / m³ / 0 ... 500 mg / m³ NO 0 ... 150 mg / m³ / 0 ... 2.500 mg / m³ NO 2 0 ... 50 mg / m³ / 0 ... 500 mg / m³ N 2 O 0 ... 100 mg / m³ / 0 ... 2.000 mg / m³ O 2 0 ... 25 Vol .-% SO 2 0 ... 75 mg / m³ / 0 ... 2.500 mg / m³
  Setting time ≤ 200 s
  Accuracy ≤ 2% Relative to the final value of the measuring range
  Sensitivity drift ≤ 3%: in the interval between maintenance activities, relative to the final value of the measuring range
  Zero point drift <3%: final value of the measuring range between maintenance
  Base point drift <3%: final value of the measuring range between maintenance
  Detection limit ≤ 2%: relative to the end value of the measuring range Total Organic Carbon (TOC) Measurement 0.05 mg / m³
  Comparative accuracy ≤ 3.3%: relative to the end value of the measuring range O 2 measurement ≤ 0.2 Vol .-%
  Measurement error ≤ 2% The final value of the measuring range
  Working temperature ≤ +1.300 ° C
  Gas temperature Analytic input ≤ +200 ° C
  Operating pressure 850 hPa ... 1.100 hPa
  Gas humidity ≤ 40 Vol .-%
  Ambient temperature +5 ° C ... +40 ° C
  Storage temperature –20 ° C ... +70 ° C
  Environmental pressure 850 hPa ... 1.100 hPa
  Environmental humidity ≤ 90% Relative humidity; non-condensing
  Conformity	Approval for installations requiring approval 2000/76 / EC (17. BImSchV) 2001/80 / EC (13. BImSchV) 27. BImSchV EN 15267 EN 14181
  electrical safety	CE
  Protection class IP54
  Analog outputs	0/4 ... 22 mA, 500 Ω Quantity depending on system configuration
  Analog inputs	0/4 ... 22 mA, 100 Ω Quantity depends on system configuration; decoupled
  Digital outputs	48 V AC, 0.5 A, 35 W / 48 V DC, 0.5 A, 24 W Quantity depends on system configuration; decoupled
  Digital inputs	3.9 V, 4.5 mA, 0.55 W Quantity depending on system configuration
  Modbus ✔ Type of integration in the bus TCP RTU RS-485
  PROFIBUS DP ✔ Note Option
  Ethernet ✔ Function Binding to SOPAS ET software or OPC server
  Indication LCD display Status LEDs “Power”, “Maintenance” and “Fault”
  Enter	Touchpad
  Control	Via LCD or SOPAS ET software, multiple access levels, password protection
  Menu languages	German, English
  Dimensions (W x H x D)	808 mm x 2.208 mm x 623 mm (For details, see the dimensional drawings)
  Weight OK. 250 kg
  Material in contact with the medium	Stainless steel 1.4571, PTFE, aluminum, coated
  Source of power Voltage 115 V / 230 V Frequency 50 Hz / 60 Hz Power consumption Analyzer: ± 1.000 W Sample gas sample line, heated: ± 95 W / m Gas Sampling Unit: ± 450 W Heated probe tube: ± 450 W
  Supporting materials Instrumentation air (zero gas quality) ≤ 350 l / h 6 ... 7 bar; particle size not more than 1 micron; oil content not more than 0.1 mg / m³; pressure dew point –30 ° C Instrumentation air (air as a working fluid for the ejector) ≤ 1.300 l / h 6 ... 7 bar; particle size not more than 1 micron; oil content not more than 0.1 mg / m³; pressure dew point –30 ° C Reference gas ≤ 350 l / h 4 bar maximum; reference gas must meet the requirements of applicable directives and standards
  Sample gas connections Sample gas inlet Compression fitting for 6 mm pipes
  Auxiliary gas connections Air as a working fluid for an ejector DN 6/8 Reference gas Compression fitting for 6 mm pipes Flue gas outlet DN 8/10
  Corrective Functions	Drift correction and optical control functions using an alignment cuvette
  Control functions	Automatic control cycle for zero and base points
  System components	Gas sampling unit Sample gas line Analytical System Cabinet
  Options	GMS811 FIDORi