Plasma cutter AUTO-CUT® XT Systems

Versatility when cutting both thin metals and large thickness metals

XT-301 is provided with consumables for cutting metals with a thickness of 1.0 mm to 35 mm. As a rule, for cutting ferrous and stainless steels, as well as non-ferrous metals, the Auto-Cut XT system with the XT-301 plasmatron is used for the economical process of cutting with air plasma, to obtain a high-quality edge with low scale formation.

For cutting ready-to-weld edges on mild steel, Auto-Cut XT allows the use of O2 plasma. For cost-effective cutting of stainless steels and aluminum with excellent edge quality, the system allows us to apply our unique technology of cutting in water mist (Water Mist Secondary - WMS®) process with a nitrogen plasma and a protective environment - water.

If cutting non-ferrous metal of large thickness is required, use Ar-H2 plasma (H35) and N2 protection, then you can get the best quality cut at thicknesses up to 35 mm.

Cut Fast on Air-to-Air Plasma

XT Torch's patented Victor Thermal Dynamics consumable technology allows you to get the perfect cut in thicknesses from 1 mm to 35 mm. Excellent cutting quality at high speeds will be achieved on both black and stainless steels and aluminum.

Small heat affected zone and smooth edge surface
Narrow cut for sharp corners and small radii at high speeds
Wide range of possible anti-scale parameters
High arc density for increased cutting speed with high quality
High Speed Cutting Stainless Steel Air Plasma

Auto-Cut XT delivers maximum performance combined with reliability and simplicity

Performance
High cutting speed to produce more workpieces per hour
When using water mist cutting technology (WMS), the cutting speed can be 3 times higher than similar systems
Highest kW output in this class
Unrivaled Consumable Life
Due to the design of the SpeedLok cartridge, the XT ™ 301 plasmatron reduces downtime when replacing consumables
Reliability
Comprehensive laboratory and stringent tests in production confirmed the guarantee of constancy of properties and reliability
Manufacturability
Microprocessor control for superior cutting performance
High precision plasma torch design for best-in-class cutting quality
Higher cutting speeds using N2 / H20 than with H35, on non-ferrous metals and stainless steel
Ease of Use

Quick and easy integration
Easy to set up and understandable gas console
Quickly replace consumables with SpeedLok ™ technology
Ability to quickly find and fix problems
XT ™ 301 Plasmatron Technology

XT Plasmatron Technology Victor Thermal Dynamics provides high performance and reliability.
Cartridge with borers that does not require the use of keys for a quick change.
High precision cartridge design to ensure proper alignment of consumables after replacing
Auto-Cut_job8.png
Quick cartridge installation on the plasma torch thanks to the SpeedLock cartridge ring
Liquid cooling of electrical contact points for consumables
Spring-loaded electrode cooling tube to prevent fluid leakage
Increased nozzle and electrode cooling
Improved life due to patented position control of consumables

Full Gas Management

Performance
High cutting speed to produce more workpieces per hour
When using water mist cutting technology (WMS), the cutting speed can be 3 times higher than similar systems
Highest kW output in this class
Unrivaled Consumable Life
Due to the design of the SpeedLok cartridge, the XT ™ 301 plasmatron reduces downtime when replacing consumables
Reliability
Comprehensive laboratory and stringent tests in production confirmed the guarantee of constancy of properties and reliability
Manufacturability
Microprocessor control for superior cutting performance
High precision plasma torch design for best-in-class cutting quality
Higher cutting speeds using N2 / H20 than with H35, on non-ferrous metals and stainless steel
Ease of Use

Quick and easy integration
Easy to set up and understandable gas console
Quickly replace consumables with SpeedLok ™ technology
Ability to quickly find and fix problems
XT ™ 301 Plasmatron Technology

XT Plasmatron Technology Victor Thermal Dynamics provides high performance and reliability.
Cartridge with borers that does not require the use of keys for a quick change.
High precision cartridge design to ensure proper alignment of consumables after replacing
Auto-Cut_job8.png
Quick cartridge installation on the plasma torch thanks to the SpeedLock cartridge ring
Liquid cooling of electrical contact points for consumables
Spring-loaded electrode cooling tube to prevent fluid leakage
Increased nozzle and electrode cooling
Improved life due to patented position control of consumables

Cutting in Water Mist (Water Mist Secondary-WMS) optimizes the cutting process of stainless steels and aluminum (option for Auto-Cut 200 XT)

WMS Benefits
Superior cutting quality for stainless steels and aluminum using N2 as plasma gas and process water as protection
Low maintenance
Cutting without scale scale from 1 mm to 20 mm
Does not allow oxidation
Wide range of parameters
Easy to use
Faster than cutting in H35
Optional in AC 200 for the position of the consumables