Supports for Unloading GPA piping

Characteristic:

• temperature of transported flows: from -30 to +200⁰C;
• nominal diameter: from 200 to 1200 mm;
• working environment: natural gas:
• Material: steel.

The product consists of a longitudinal-transverse branch pipe and a base fixed to the foundation. Such a design has increased strength due to the responsibility of the unit, allows to dampen vibrations and impacts.

The device is made of steel grades: st. 20, 20YuCh, 09G2S, 13KhFA, 15Kh5M, 12Kh18N10T, 10Kh17N13M2T. Assembly and welding are carried out according to the requirements of SNiP 3.05.05-84, VSN 012-88.

TECHNICAL SPECIFICATIONS

1. The support is designed to compensate for horizontal vibrations acting on the pipeline, arising during the operation of the compressor unit, torques and temperature deformations;

2. Working pressure of the installed pipeline up to 25.0 MPa;

3. Installation location - above ground, in the unit shelter, pressure (suction) gas pipeline;

4. Temperature of the pumped product from 0 to +173 °C

5. The material design of the support corresponds to operating temperatures down to -60 °C.

The supports are made of steel St.09G2S, the stud, nut, washer - St.40X.

6. Estimated mass of the supporting structure: from 174.1 to 700.3 kg.

Table of designations of unloading supports