Vacuum unit AKN-10 KAMAZ-43118 RBA

(设备/材料)

型号编号: АКН-10 КАМАЗ-43118 РБА

状态: New

位置或存放国家: Russia

服务工程支持: Yes

保证: Yes

价钱: 要求价格

描述:

The AKN-10 vacuum unit based on the KAMAZ-43118 is designed for the efficient collection of petroleum products, gas condensate, non-aggressive process fluids, and their transportation to the disposal site. The AKN-10 tanker truck can be manufactured on the KAMAZ-43118 chassis in all climatic versions, with or without a driver's berth. Tank components: tank (round cross-section, 09G2S), vacuum pump (KO-510, PNR-124, PVT-200, PVT-400, VK-6M2 or NVR-8/3), electrical equipment, fire-fighting equipment (fire extinguishers, sand box), measuring instruments (pressure and vacuum meter).

概观:

Tank characteristics

Volume, cubic meters	10
Cross section shape	round
Number of sections in the tank	1
Opening the bottom	mechanical/hatch/no (depending on configuration)
Steel grade	09G2S (low-alloy steel with a thickness of at least 4 mm)
Frames	External
Fastening the tank to the chassis	belt mount ("floating type") or technological support ("load-bearing support")

Characteristics of the installed pumps

Indicator	KO-505	PNR-122	PVT-200	PVT-400	VK-6M2	VR-8/3
Productivity, cubic meters/hour	310	740	1280	2600	240	480
Efficiency, %	80–90	92	92	92
Rotation speed, rpm	1150	1300	3000–4500	3000–4500	1500	26
Maximum vacuum	0.085 MPa	92%	0.0037 MPa	0.0037 MPa	0.0039 MPa
Maximum pressure, bar	0.6	2	2	2	1.5	2.93
Power, kW	9	19	38	38	22	22
Maximum heating of the pump, °C	80	150	90	90	-	-
Weight, kg	125	177	160	240	530	170

Vacuum equipment for tanks

Pump drive	from PTO / from HOUSE / from vehicle hydraulic system / from cardan shaft
Suction and delivery hoses	2 pcs., DU-75, length 6 m
Sleeve cases	metal boxes on both sides of the tank; length 4 m, width 0.48 m.
Vacuum Installation Protection Components	the first shut-off valve in the neck, the second shut-off valve in the receiver, vacuum valve (-0.8 kg/ ^cm2 ), excess pressure valve (0.4 kg/ ^cm2 ), MS DUG11-N-10 fill limit sensor with chassis engine shutdown.

Characteristics of the KAMAZ-43118 chassis

Engine
Model	KAMAZ-740.662-300
Cylinder diameter and piston stroke, mm	120/130
Max. useful torque, Nm (kgcm)	1275 (130)
at crankshaft speed, rpm	1300
Maximum useful power, kW (hp)	221 (300)
at crankshaft speed, rpm	1900
Working volume, l	11.76
Arrangement and number of cylinders	V-shaped,8
Fuel supply system	Common Rail
Compression ratio	17
Engine type	diesel turbocharged, intercooled
Fuel equipment	BOSCH
Cabin
Execution	without a berth or with a berth (depending on the configuration)
Cabin type	restyled, located above the engine
DZK	behind the cabin
Wheels and tires
Rim size	12.2-20.9
Tire size	425/85 R21
Wheel type	disk
Tyre type	pneumatic, with pressure regulation
Shredding	Single-pitched
Transmission
KP model	ZF 9S1310
Gear ratios on gears	1-9.48; 2-6.58; 3-4.68; 4-3.48; 5-2.62; 6-1.89; 7-1.35; 8-1.00; 9-0.75; ZH-8.97
Type	mechanical, 9-speed
Control	mechanical, remote
Transfer case
Type	mechanical, two-stage with locking center differential
Control	pneumatic
Power supply system
Fuel tank capacity, l	350+210
Clutch
Drive	hydraulic with pneumatic booster
Type	diaphragm, single-disc, mod. ZF&SACHS MFZ 430
Brakes
Drive	pneumatic
Dimensions drum diameter, mm	400
Brake lining width, mm	140
Characteristics of the vehicle gross weight
External turning radius, m	11.5...12.9
Maximum speed, not less than, km/h	90
Angle of climb, not less than, % (deg)	31
Electrical equipment
Batteries, V/A•h	2×12/190
Generator, V/W	28/3000
Voltage, V	24

#Спецтехника #Вакуумный агрегат

公司简介

NPO Vector

市场: РФ, СНГ

地点: Russia, Chelyabinsk Oblast, Miass, Turgoyakskoe highway, 5/9a

主要产品/服务: Comprehensive provision of oil producing companies with specialized equipment.