添加产品
Product / Equipment

Self-Propelled Mulcher on Caterpillar tracks Onezhets 390

(设备/材料)
型号编号: ОН3903010001
状态: New
位置或存放国家: Russia
服务工程支持: Yes
保证: Yes
价钱: 要求价格
描述:
The new model mulcher tractor "Onezhets 390" is widely used in forestry and agriculture. It is designed for high-quality crushing of bushes, branches, twigs and tree trunks not exceeding 25 cm in diameter, as well as servicing the right-of-way of highways, railway lines, clearing areas under high-voltage lines and oil pipelines. It is also convenient as the main assistant in primary cultivation and clearing fields of small vegetation for subsequent agricultural needs. It is usually used in sparse forests or in open areas of parks and squares. It can be used in road construction and in municipal services of cities and villages.
概观:

The tractor is equipped with a reinforced frame and chassis system of the guide front and driving rear wheels. The average ground pressure is reduced to 0.03 MPa, due to the increase in the width of the supporting surface. The improved chassis system with an extended track, two-stage gearboxes and large driving wheels, close to the main support, allow easy use of the machine in hard-to-reach and swampy areas. The mulcher is equipped with electrical equipment with a DC voltage of 24 V, and a generator with a unit that regulates and rectifies the voltage.

The tractor cabin has been upgraded with noise and heat insulation, as well as a microclimate system that makes working and staying inside more comfortable. The cabin safety frame provides the driver with protection from injuries in emergency situations. The fully rotating seat is protected from strong vibration and is height adjustable. An ergonomic control panel is installed for efficient maintenance and convenient control.

An adjustable hydraulic pump on the engine and a motor on the rear axle block from Rexroth provide hydrostatic transmission for easy machine control.

The new model of the tractor-chopper "Onezhets 390" will work long and smoothly and will help in solving the tasks quickly and efficiently. It is used by both private and state structures to perform various works.

Brand Onezhets 390
Overall dimensions, mm
Length 6500
Width 2450
Height 2980
Track 1850
Ground clearance 550
Weight, kg
Operational 14180
Attachments and technological equipment
Brushcutter equipment UM L/SS-200 "FAE", Italy.
Working width, mm 1930
Type of incisors with fixation
Rotor speed, min -1 2100
Maximum diameter of cut trunks, cm -2 250
Winch
Drive Hydraulic
Maximum traction force, kN 105
Rope capacity, m 40
Engine
Brand and manufacturer D-260.9S2 (Minsk Motor Plant)
Operating power, kW (hp) 132 (180)
Nominal speed, min -1 2200
Specific fuel consumption, g/kW•h 227
Fuel tank capacity, l 140
Transmission
Type Hydrostatic
Speed range, km/h
forward
back

0 … 11.0
0 … 11.0
Rotation mechanisms Multi-disc, dry friction, permanently closed
Service brake Two dry friction band brakes on the drums of the turning mechanisms
Parking brake Mechanical, acting on the right service brake.
Final drives Two-stage gearboxes: cylindrical pair and planetary gearbox
Chassis system
Drive wheels With removable gear rims
Number of teeth 16
Tooth pitch, mm 150
Track width, mm 600
The highest of the average specific pressures on the ground (without load), MPa 0,030
Hydraulic system of technological equipment of the tractor
Pump NSh-32U-3-L on the engine
Maximum pressure, mPa 14.0
Hydraulic tank capacity, l 140
Hydraulic drive for brush cutting equipment
Hydraulic pump, adjustable A10VSO (Rexroth)
Nominal flow rate, l/min 190
Hydraulic motor, not adjustable S1D110 (Sauer Danfoss)
Maximum pressure, mPa 20.0
Electrical equipment
Current Constant
Nominal voltage, V 24
Generator With built-in rectifier and voltage regulator unit
Battery (2 pcs.) 6ST-132AM
Cabin
Cabin
  • Safety frame that meets FOPS, ROPS, OPS standards;
  • Effective vibration, noise and heat insulation;
  • Systems for normalizing the microclimate in winter and summer
Seat
  • Fully rotating sprung
Control
  • Ergonomic control panel with standard values of control forces

Technical characteristics of the UM-Forest fixed -tooth mulcher

Model

UM-Forest 200

UM-Forest 220

Base machine

tractor,

from 120 hp

tractor,

from 150 hp

Shaft diameter per tooth, mm

460

460

Weight

1790 kg

1930 kg

Width

2350 mm

2550 mm

Working width

2000 mm

2200 mm

Height without pusher

1050 mm

1050 mm

Depth

1060 mm

1060 mm

Rotor speed

up to 2100 rpm

up to 2100 rpm

Number of drive belts, pcs.

10

10

Drive type

2-way

2-way

Type of teeth

Fixed.

Fixed.

Number of teeth, pcs.

42

48

Adjusting the sleds

There is

There is

Pusher frame

There is

There is

Diameter of trees to be crushed

up to 300 mm

up to 300 mm

Working speed

0.5-5 km/h

0.5-5 km/h

Technical characteristics of FAE mulchers

MODEL 140/U-140 140/U-175 140/U-200

• Rotor diameter

• Overall width

• Working width

• Weight without options

• Max. working depth

• Cutting diameter (max)

• Number of cutters with brazing

made of tungsten carbide

• Rotor speed

• Hydraulic motor type

420 mm

1750 mm

1465 mm

1350 kg

50 mm

200 mm

28 + 2

2300

Sauer Danfoss 160 cc.

420 mm

2120 mm

1820 mm

1450 kg

50 mm

200 mm

36 + 2

2300

Sauer Danfoss 160 cc.

420 mm

2330 mm

2060 mm

1550 kg

50 mm

200 mm

42 + 2

2300

Sa uer Danfoss 160 cc


OOO "ALT"

市场: РФ
主要产品/服务: Crawler tractors
注册: 185013, Republic of Karelia, city Petrozavodsk, ul Novosulazhgorskaya (Rybka R-N), d. 23, office 204