Manifolds MB-250 and MPB5-80x35
(Equipment / Material)
Model Number: МБ-250 и МПБ5-80х35
Condition: New
Location or Storage Country: Russia
Location: Russia, Yekaterinburg
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
The drilling manifold MB-250 (Figure 1) is designed for transporting drilling fluid from mud pumps to the riser flange in the drilling rig and to the pipeline bundling devices of the drilling fluid preparation and treatment system
Overview:
| OPTIONS | MB-250 |
| Working pressure, MPa | 25.0 |
| Test pressure, MPa | 37.5 |
| Nominal diameter, mm | one hundred |
| Weight kg | 5,000 |
The MPB5-80x35 manifold is used to carry out a complex of measures to eliminate gas and oil manifestations during the drilling of oil and gas wells. The manifold is designed to complete blowout equipment according to GOST 13862-80 1-2-5th circuit for operating pressure up to and including 35 MPa. Designed for operation in moderate and cold (-45 °, + 45 °) microclimatic regions according to GOST 16350-80.
| Manifold MPB5-80x35 |
| OPTIONS | MPB5-80x35 |
| Blowout control scheme according to GOST 13862-80 | 1 and 5 |
| Conditional pass, mm | 80 |
| Working pressure, MPa | 35 |
| Total length of pipes, m, not less | 112 |
| Type of locking devices | Gate valves 3M-80x35 with manual control Gate valves 3M-80Gx35 with remote hydraulic control |
| Type of throttle devices | Chokes DR-80x35 with manual control and DR-80Gh35 with remote control |
| Remote control valve 3M-80Gh35 | From a blowout control station |
| Remote Throttle Control | From throttle control |
| Operating pressure in the valve control system and in the throttle MP | 10 |
| Well environment temperature, no more than ° С | 120 |
| The mass of the manifold, assembled, kg: | 8 260 |
Ural Machine Plant
Total Employees: 35
Locations: Russia, Yekaterinburg
Main Products/Services: Design, manufacture and modernization of drilling equipment
Registration: Russia, Yekaterinburg
Year Established: 2012