Roughness Meter Time TR100
(Equipment / Material)
Model Number: TR100
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: Yes, 12 months
Price: Call for price
Description:
TR100 Profiler manufactured by TIME Group Inc. - a portable device for measuring surface roughness parameters on all types of surfaces (metals and non-metals) according to the Ra and Rz scales. The TR 100 has a high degree of accuracy, makes measurements over a wide range, and is also simple and reliable.
Overview:
Surface roughness measurements are carried out by the contact method using a special sensor with a diamond needle. When the device is installed on a controlled surface of the part, the sensor is driven by a miniature electric motor, and the needle moves along the “track”, measuring the surface profile in this segment, after which the roughness parameters are converted by the microprocessor of the device and displayed digitally on the display of the profilometer.
Distinctive features of the roughness meter (profilometer) TR100:
- Small overall dimensions and weight of the device;
- Wide measuring range, suitable for most materials;
- The roughness meter is designed for measurements on flat surfaces, the outer surfaces of cylinders and inclined surfaces;
- Carrying out measurements on the scales of Ra and Rz;
- The roughness meter (profilometer) TR 100 is equipped with an external calibration function;
- The device complies with the requirements of standards: ISO (International Organization for Standardization), DIN (German Institute of Standards).
Technical characteristics of the roughness meter (profilometer) TR100:
| Roughness Measured | Ra, Rz |
| Scan Track Length | 6 mm |
| Probe Speed | 1.0 mm / s |
| Step Cutoff Values | 0.25 mm / 0.8 mm / 2.5 mm |
| Roughness Parameter Estimation Length | 1.25 mm / 4.0 mm / 5.0 mm |
| Measurement range by parameters | Ra: 0.05 - 10.0 μm Rz: 0.1 - 50 μm |
| Permissible basic error | ± 15% |
| Repeatability of measurement results | <12% |
| Filter type | analog capacitive |
| Sensor type | piezoelectric |
| Radius of curvature and probe tip angle | diamond needle with radius: 5 ± 1 μm angle: 90 ° (+ 5 ° or - 10 °) |
| Operating temperature range | 0 to 40 ° C |
| Relative humidity | <80% |
| Storage temperature range | from - 25 to 60 ° C |
| Degree of accuracy | class 3 |
| Power supply | 2 x 3.6 V Ni-MH batteries |
| Charger | 9 V DC, 10 - 15 hours (recharge time) |
| dimensions | 125 x 73 x 26 mm |
| Mass of the electronic unit | 200 g |
Basic delivery:
- The electronic unit;
- Protective cover for the sensor;
- Exemplary Roughness Measure;
- Charger;
- Manual;
- Warranty Card;
- Case for transportation and storage.
LLC "Techint"
Locations: Russia Moscow
Main Products/Services: Non-destructive testing devices
Registration: Russia Moscow
Year Established: 1984