Spiral Refrigeration units

(Equipment / Material)

Condition: New

Location or Storage Country: Russia

Service Engineering Support: Yes

Warranty: Yes

Price: Call for price

Overview:

scroll compressor	Crankcase heater, shut-off valves, protective pressure switches for each compressor
discharge line	collector, pipelines before/after collector, pressure gauge, general protective relay
suction line:	pipelines to compressors, dismountable filter-purifier, pressure gauge, general protective relay, pressure sensor
oil return system	Oil separator, oil collector, pressure relief valve, sight glass, electronic oil level regulators for each compressor, oil filter for each compressor, shut-off valve for each compressor
frame	prefabricated/welded

A1	Insulated liquid separator, heater
B1	Control panel on the frame of the unit with connection to the Danfoss controller
B2	Control panel on the frame of the unit with connection to the Dixell controller
B3	Control panel on the frame of the unit with connection to the Carel controller
B4	Control panel on the frame of the unit with connection to the Eliwell controller
B5	Terminal box on the unit frame with connection
B6	Control panel on a frame with a freely programmable controller
C1	One pressure switch to control condenser fans
C2	Two pressure switches for controlling condenser fans
C3	Three pressure switches for controlling condenser fans
C4	Pressure sensor for controlling condenser fans (step control)
C5	Pressure sensor for controlling condenser fans (smooth control using a frequency converter or speed controller)
C6	Direct acting speed controller
D1	Pressure regulator on the discharge line, check valve on the drain to the receiver, NRD (KVD) on the bypass line, shut-off valve on the bypass line
D2	Pressure regulator on the drain to the receiver, NRD (KVD) on the bypass line, shut-off valve on the bypass line
H1	Additional compressor crankcase heater, thermostat, thermal insulation

H2	Receiver heater, pressure switch, receiver thermal insulation, check valve on the drain into the receiver
H3	Heating of the SHU
L1	Refrigerant receiver (up to 63L on the unit frame), inlet/outlet shut-off valves, safety valve, liquid line, filter drier, sight glass, shut-off valve
L2	Enlarged refrigerant receiver (up to 63l on the unit frame), shut-off valves at the inlet/outlet, safety valve, liquid line, filter-drier, sight glass, shut-off valve
N1	Check valve after oil separator
N2	Check valve after each compressor
N3	Check valve on the drain into the receiver
P1	External display
S1	Shut-off valve on the suction line
S2	Shut-off valve on the discharge line
T1	Two safety valves, three-way valve
V1	Vibration dampers on the discharge and suction of each compressor (anaconda)
V2	Vibration damping supports for the unit
W2	Electricity meter

Company Profile

Main Products/Services: Refrigeration and ventilation equipment

Registration: 127081, Moscow, Dezhneva ave., 1, floor 6, room VIII, office 612