添加产品
Product / Equipment

Spiral Refrigeration units

(设备/材料)
状态: New
位置或存放国家: Russia
服务工程支持: Yes
保证: Yes
价钱: 要求价格
概观:

STANDARD EQUIPMENT

scroll compressor Crankcase heater, shut-off valves, protective pressure switches for each compressor
discharge line collector, pipelines before/after collector, pressure gauge, general protective relay
suction line: pipelines to compressors, dismountable filter-purifier, pressure gauge, general protective relay, pressure sensor
oil return system Oil separator, oil collector, pressure relief valve, sight glass, electronic oil level regulators for each compressor, oil filter for each compressor, shut-off valve for each compressor
frame prefabricated/welded

OPTIONS

A1 Insulated liquid separator, heater
B1 Control panel on the frame of the unit with connection to the Danfoss controller
B2 Control panel on the frame of the unit with connection to the Dixell controller
B3 Control panel on the frame of the unit with connection to the Carel controller
B4 Control panel on the frame of the unit with connection to the Eliwell controller
B5 Terminal box on the unit frame with connection
B6 Control panel on a frame with a freely programmable controller
C1 One pressure switch to control condenser fans
C2 Two pressure switches for controlling condenser fans
C3 Three pressure switches for controlling condenser fans
C4 Pressure sensor for controlling condenser fans (step control)
C5 Pressure sensor for controlling condenser fans (smooth control using a frequency converter or speed controller)
C6 Direct acting speed controller
D1 Pressure regulator on the discharge line, check valve on the drain to the receiver, NRD (KVD) on the bypass line, shut-off valve on the bypass line
D2 Pressure regulator on the drain to the receiver, NRD (KVD) on the bypass line, shut-off valve on the bypass line
H1 Additional compressor crankcase heater, thermostat, thermal insulation
H2 Receiver heater, pressure switch, receiver thermal insulation, check valve on the drain into the receiver
H3 Heating of the SHU
L1 Refrigerant receiver (up to 63L on the unit frame), inlet/outlet shut-off valves, safety valve, liquid line, filter drier, sight glass, shut-off valve
L2 Enlarged refrigerant receiver (up to 63l on the unit frame), shut-off valves at the inlet/outlet, safety valve, liquid line, filter-drier, sight glass, shut-off valve
N1 Check valve after oil separator
N2 Check valve after each compressor
N3 Check valve on the drain into the receiver
P1 External display
S1 Shut-off valve on the suction line
S2 Shut-off valve on the discharge line
T1 Two safety valves, three-way valve
V1 Vibration dampers on the discharge and suction of each compressor (anaconda)
V2 Vibration damping supports for the unit
W2 Electricity meter

Technofrost LLC

主要产品/服务: Refrigeration and ventilation equipment
注册: 127081, Moscow, Dezhneva ave., 1, floor 6, room VIII, office 612