Semi-Submersible Electric pump units HP-E
(Equipment / Material)
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: Yes
Price: Call for price
Description:
Vertical, semi-submersible pumping units with supports in the pumped liquid type HP-E are designed for pumping oil and petrochemical liquids with a density of no more than 1850 kg/m3, with a maximum volume concentration of solids of no more than 0.2% with a size of solids up to 0.2 mm, a kinematic viscosity of 85 10 -6 m 2 /s, with a temperature from -50 ° C to +450 ° C. Pumps of the HP-E series are designed to operate in conditions of high temperatures and high pressures, can be used when pumping flammable hazardous liquids, can be used in the chemical, mining and metallurgical industries, oil and gas refining, oil and gas production, power engineering. The design of the HP-E series pumps fully complies with API 610 type VS4.
Overview:
| Item No. | Brand electric pump | Feed nominal, Q (min, max), m3 /h* | Nominal pressure, N (max, min), m* | ∆h, m, add. | Rotation frequency, rpm | Engine power, Nэд., kW | Unit weight, kg** | Overall dimensions, LxDxH, mm** |
|---|---|---|---|---|---|---|---|---|
| 1. | HP-E 80-25-250 | 4-18 | 28-92 | 2-3 | 2950 | 7.5; 11; 15; 18.5 | 800-2000 | 2950-6150x1145x1145 |
| 2. | HP-E 80-40-250 | 12-44 | 32-96 | 0.8-2.5 | 2950 | 7.5; 11; 15; 18.5; 22 | 800-2000 | 2950-6150x1145x1145 |
| 3. | HP-E 100-50-250 | 18-85 | 34-97 | 0.8-4.5 | 2950 | 15; 18.5; 22; 30 | 800-2000 | 2950-6150x1145x1145 |
| 4. | HP-E 100-50-315 | 10-80 | 60-140 | 0.7-2.5 | 2950 | 22; 30; 37; 45; 55 | 800-2000 | 2950-6150x1145x1445 |
| 5. | HP-E 100-80-250 | 35-150 | 36-97 | 1.9-2.3 | 2950 | 22; 30; 37; 45 | 800-2000 | 2950-6150x1145x1145 |
| 6. | HP-E 150-100-250 | 42-295 | 37-95 | 3.8-4.0 | 2950 | 37; 45; 55 | 800-2000 | 2950-6150x1145x1145 |
Conventional designation HP-E 100-50-250-0.8-K-55-U2 , where:
HP – semi-submersible vertical, with supports in the pumped liquid;
E - explosion-proof design;
100 - inlet pipe diameter, mm;
50 - outlet pipe diameter, mm;
250 - impeller diameter, mm;
0.8 – immersion depth, m (possible immersion depth: 0.8; 1.0; 1.2; 1.4; 1.6; 1.8; 2.0; 2.2; 2.4; 2.6; 2.7; 2.8; 3.0; 3.2; 3.4; 3.5; 3.6; 3.8; 4.0);
55 - type of mechanical seal;
K - conventional designation of the flow part material (K, A, D);
U2 – climatic version and placement category during operation according to GOST 15150-69.
* - feed and pressure depend on the wheel trim and are discussed when ordering.
** - weight and overall dimensions are indicated for units with different immersion depths.
JSC "ENA"
Main Products/Services: Pumping equipment