Insulator SHPU-20MA UHL
(Equipment / Material)
Model Number: ШПУ-20МА УХЛ
Condition: New
Location or Storage Country: Russia
Service Engineering Support: Yes
Warranty: Yes
Price: Call for price
Description:
It is designed for installation directly on a crossbar with a through hole using a threaded pin of the lower end-piece, washers and a nut. End-pieces are usually manufactured with M20, M22, M24 threads. The upper insulator head is made of aluminum alloy. The rubber coating of the upper and lower end-pieces and the use of waterproofing locks provide increased moisture resistance. The insulator design provides for fastening of uninsulated wires according to GOST 839 and insulated SIP wires according to GOST R 52373 in various ways - the wire can be fixed in a gutter or on the insulator neck using spiral ties. The aluminum alloy cover prevents the wire from slipping when installed in a gutter, and can also provide a blind fastening in the range of Ø20 ... 24 mm. When turning the power transmission line, the wire is fixed on the insulator neck.
Overview:
| Type of insulator | SHPU-20MA UHL1 |
| Nominal voltage, kV | 20 |
Full lightning impulse withstand voltage, not less than, kV | 150 |
Industrial frequency withstand voltage - in dry condition: - in the rain: kV, not less than | 75 60 |
Minimum destructive force bending strength, kN, not less than | 12.5 |
Leakage path length, not less than, cm | 42 |
| Weight, not more than, kg | 1.65 |
JSC "TAIZ"
Locations: 300028, g. Tula, st. Polzunova, d. 9B
Main Products/Services: Electrical equipment