MPA-80 Installation
(Equipment / Material)
Model Number: МПА-80
Condition: New
Location or Storage Country: Russia
Location: Russia Moscow
Service Engineering Support: Yes
Warranty: No
Price: Call for price
Description:
The installation allows you to create a load on the hook up to 80 tf, in cases of puffs, pacing, breakdown packers, etc., subject to all necessary safety measures when working with braces for attachment to external anchors.
Overview:
The MPA-80 installation is intended for:
- repair, drilling and development of oil and gas wells during repairs with a conditional depth of 4000 meters (tubing 14 kg / m), when drilling wells 2000 meters (when drilling a column 24 kg / m);
- drilling cement plugs in pipes with a diameter of 146-168 mm (5-6 ") associated with this process operations (lowering and raising drill pipes, flushing wells, etc.);
- descent and lifting of tubing;
- installation of production equipment at the wellhead;
- carrying out repair and liquidation of accidents;
- conducting drilling operations.
MAIN TECHNICAL DATA AND CHARACTERISTICS
Maximum load capacity kN (tf), no more nominal | 800 (80) |
Assembly and transport base | KrAZ-63221 configuration 0000100 (hereinafter KrAZ) |
* Pumping installation | NB type pump |
Gear drive | Traction KrAZ-YaMZ 238 chassis engine with a power of 176.5 kW (240 hp) |
Maximum drive power of the lifting unit, kW (hp), rated | 243 (330) |
Winch (type) | Single drum with chain drive, dual belt brake and drum pneumatic clutch |
Rise speed, m / s, estimated | |
Smallest | 0.191 ± 5% |
The largest | 1,444 ± 5% |
Winch Speed Number | four |
Mast | Telescopic, inclined with auxiliary winch rollers, upper section extension limiter and breaker shield |
Height to crown block axis, m | 22.4 ± 0.4 |
The length of the candle, the raised pipe string, m, not more than, calculated | 16 |
Rigging | 3x4 |
Diameter of a rope in accordance with GOST 16853-88, mm | 25 |
Pulley rate | 6 |
* Hydraulic rotor | |
The moment of force on the rotor table, kN * m (kgf * m), calculated | 6.3 (630) |
Rotor table feedthrough, mm | 142 |
Fastener of threaded pipe joints type | hydraulic |
The force on the rod at a pressure of 6 MPa (60 kgf / cm²), kN (tf) | 50 (5) ± 5% |
Stroke length, mm | 800 ± 20 |
Drill rotor drive shaft | |
Rotational speed, С¹ (rpm), calculated | |
1 speed | 3.78 (226) |
2 speed | 7.48 (448) |
Hydraulic winch | Lg-4 TU 3666-001-97973821-2007 |
Hook load, kN maximum | 2,5 |
Lifting speed, m / s, | 0.25 |
* Flushing pump | NB TU26-02-265 or NB-125-1 NB.00.00.000TU |
Ideal pump flow (naib.), M³ / h (dm³ / s), not less | 63 (18 ± 10%) 71 (19.7 ± 10%) |
Maximum pump pressure, MPa (kgf / cm²) | 16 (160 ± 10%) 17 (170 ± 10%) |
Mode of operation | Diameter of pump bushings, mm | Perfect feed l / s | Ultimate pressure MPa (kgf / cm²) |
120 double strokes per minute (619 rpm pulley) | 90 | 11.1 | 9.8 (100) |
one hundred | 14.1 | 7.84 (80) | |
110 | 17.3 | 6.37 (65) | |
125 | 22.9 | 4.9 (50) | |
62 double strokes per minute (313 rpm) | 90 | 5.8 | 16.0 (160 |
one hundred | 7.3 | 14.2 (145) | |
110 | 9.0 | 11.3 (115) | |
125 | 11.8 | 8.8 (90) |
* Installation base for the installation of pumping NB | Frame base pump type |
Overall dimensions of the lifting installation in transport position, mm, no more | |
Length | 14000 |
Width | 2900 |
Height | 4300 |
Mass of lifting installation in transport position, kg, no more | 28,200 |
Unit weight complete with accessories and spare parts, kg, no more | 35540 |
Resource before overhaul, h | 13000 |
MTBF, h | 600 |
Full set service life, years, not less | 9 |
The dependence of the characteristics of the unit on the mass of the load on the hook is shown in the table
Speed | The mass of the load on the hook, t | Block speed, m / s | Drum rotation frequency, rpm |
I | 80 | 0.191 | 0.87 |
II | 60 | 0.191 | 0.87 (39.5) |
III | 30,0 | 0.38 | 1.30 (78) |
IV | 15.8 | 1,444 | 4.90 (294) |
Product Included
Installation lifting assembly, set | one |
Complete pumping unit, set * | one |
Purchased items: | |
Weight indicator | |
IVE-50 TU 25-02-964-75, pcs * | one |
Spare parts for installation kit | one |
Set of spare parts for purchased products in accordance with the documentation for purchased products, set | one |
The following items are attached to the product kit: | |
Supporting documentation for installation, kit | one |
Supporting documentation for purchased products, set | one |
* Available for a fee
Mashprom OJSC
Total Employees: 1
Locations: Russia Moscow
Main Products/Services: Manufacturer and supplier of a wide range of blowout control equipment
Registration: Russia Moscow
Year Established: 2003