MPA-80 Installation

(设备/材料)

型号编号: МПА-80

状态: New

位置或存放国家: Russia

位置: Russia Moscow

服务工程支持: Yes

保证: No

价钱: 要求价格

描述:

The installation allows you to create a load on the hook up to 80 tf, in cases of puffs, pacing, breakdown packers, etc., subject to all necessary safety measures when working with braces for attachment to external anchors.

概观:

The MPA-80 installation is intended for:

- repair, drilling and development of oil and gas wells during repairs with a conditional depth of 4000 meters (tubing 14 kg / m), when drilling wells 2000 meters (when drilling a column 24 kg / m);

- drilling cement plugs in pipes with a diameter of 146-168 mm (5-6 ") associated with this process operations (lowering and raising drill pipes, flushing wells, etc.);

- descent and lifting of tubing;

- installation of production equipment at the wellhead;

- carrying out repair and liquidation of accidents;

- conducting drilling operations.

MAIN TECHNICAL DATA AND CHARACTERISTICS

Maximum load capacity kN (tf), no more nominal	800 (80)
Assembly and transport base	KrAZ-63221 configuration 0000100 (hereinafter KrAZ)
* Pumping installation	NB type pump
Gear drive	Traction KrAZ-YaMZ 238 chassis engine with a power of 176.5 kW (240 hp)
Maximum drive power of the lifting unit, kW (hp), rated	243 (330)
Winch (type)	Single drum with chain drive, dual belt brake and drum pneumatic clutch
Rise speed, m / s, estimated
Smallest	0.191 ± 5%
The largest	1,444 ± 5%
Winch Speed Number	four
Mast	Telescopic, inclined with auxiliary winch rollers, upper section extension limiter and breaker shield
Height to crown block axis, m	22.4 ± 0.4
The length of the candle, the raised pipe string, m, not more than, calculated	16
Rigging	3x4
Diameter of a rope in accordance with GOST 16853-88, mm	25
Pulley rate	6
* Hydraulic rotor
The moment of force on the rotor table, kN * m (kgf * m), calculated	6.3 (630)
Rotor table feedthrough, mm	142
Fastener of threaded pipe joints type	hydraulic
The force on the rod at a pressure of 6 MPa (60 kgf / cm²), kN (tf)	50 (5) ± 5%
Stroke length, mm	800 ± 20
Drill rotor drive shaft
Rotational speed, С¹ (rpm), calculated
1 speed	3.78 (226)
2 speed	7.48 (448)
Hydraulic winch	Lg-4 TU 3666-001-97973821-2007
Hook load, kN maximum	2,5
Lifting speed, m / s,	0.25
* Flushing pump	NB TU26-02-265 or NB-125-1 NB.00.00.000TU
Ideal pump flow (naib.), M³ / h (dm³ / s), not less	63 (18 ± 10%) 71 (19.7 ± 10%)
Maximum pump pressure, MPa (kgf / cm²)	16 (160 ± 10%) 17 (170 ± 10%)

Mode of operation	Diameter of pump bushings, mm	Perfect feed l / s	Ultimate pressure MPa (kgf / cm²)
120 double strokes per minute (619 rpm pulley)	90	11.1	9.8 (100)
	one hundred	14.1	7.84 (80)
	110	17.3	6.37 (65)
	125	22.9	4.9 (50)
62 double strokes per minute (313 rpm)	90	5.8	16.0 (160
	one hundred	7.3	14.2 (145)
	110	9.0	11.3 (115)
	125	11.8	8.8 (90)

* Installation base for the installation of pumping NB	Frame base pump type
Overall dimensions of the lifting installation in transport position, mm, no more
Length	14000
Width	2900
Height	4300
Mass of lifting installation in transport position, kg, no more	28,200
Unit weight complete with accessories and spare parts, kg, no more	35540
Resource before overhaul, h	13000
MTBF, h	600
Full set service life, years, not less	9

The dependence of the characteristics of the unit on the mass of the load on the hook is shown in the table

Speed	The mass of the load on the hook, t	Block speed, m / s	Drum rotation frequency, rpm
I	80	0.191	0.87
II	60	0.191	0.87 (39.5)
III	30,0	0.38	1.30 (78)
IV	15.8	1,444	4.90 (294)

Product Included

Installation lifting assembly, set	one
Complete pumping unit, set *	one
Purchased items:
Weight indicator
IVE-50 TU 25-02-964-75, pcs *	one
Spare parts for installation kit	one
Set of spare parts for purchased products in accordance with the documentation for purchased products, set	one
The following items are attached to the product kit:
Supporting documentation for installation, kit	one
Supporting documentation for purchased products, set	one

* Available for a fee

公司简介

Mashprom OJSC

员工总数: 1

地点: Russia Moscow

主要产品/服务: Manufacturer and supplier of a wide range of blowout control equipment

成立年: 2003